Replaces

Brake Kit Nakamoto CD1075, CD999, 55087, 55085 - 1ABFS02590

Brake Pad Specifications:

  • Ceramic Brake Pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Come as a Set of 4
  • Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 5 lug wheels
  • 11.69" (297mm) diameter front 
  • 10.63" (270mm) diameter rear

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel and tire (1:30)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:00)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 15mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
  3. step : Remove brake disk (2:44)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (2:56)
    • Remove the 3 bolts securing the hub using your 13mm socket and 3/8 extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a rubber mallet to break it free, and work around the flange with the hammer to pull it off.
    • Leave the top 13mm loosely still in to prevent the hub from flying out if you hit it too hard.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (8:30)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Watch part 2 to install your new 1A Auto hub!

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

4.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
1
0
0
Brakes and Rotors
1st time using 1A. Received Parts extremely fast, happy with parts and the service.
July 9, 2017
Purchased
8 months ago
wrong size.
Don't know what I was expecting for such a cheap set. I would at least expect the brake pads to fit though, without having to pry of the back plates and spray them with disc quiet so that my wheels wouldn't lock up. Really disappointed in that. They work fineish.
August 20, 2017
Purchased
6 months ago
great price
packaging was poor, and wrong order received the first time but when I called they were really nice about getting the proper item to me. As for the parts, the brake pads were replaced without a hitch - but turns out the disks didn't need so I can't say anything about them
December 2, 2017
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:37 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket



This part replaces:

  • Reference Number AX55087
  • Reference Number CD1075
  • Reference Number CD999
  • Hollander 530-00121
  • Nakamoto CD1075, CD999, 55087, 55085

Vehicle Fit

  • 2005-2007 Buick Allure Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2008 Buick Allure V6 3.6L Front & Rear Premium Posi Ceramic Brake Kit excluding Super Models Nakamoto
  • 2008 Buick Allure V6 3.8L Front & Rear Premium Posi Ceramic Brake Kit excluding Super Models Nakamoto
  • 2005-2007 Buick LaCrosse Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2008 Buick LaCrosse V6 3.6L Front & Rear Premium Posi Ceramic Brake Kit excluding Super Models Nakamoto
  • 2008 Buick LaCrosse V6 3.8L Front & Rear Premium Posi Ceramic Brake Kit excluding Super Models Nakamoto
  • 2005-2008 Pontiac Grand Prix V6 3.8L Front & Rear Premium Posi Ceramic Brake Kit excluding GXP Models Nakamoto
Part #: 1ABFS02590

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD1075, CD999, 55087, 55085

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More