This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacement

Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side REAR
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: 4779208AA, 4779208AB
  • Fits 5 Stud Wheels
  • Direct replacement for models that use a SOLID ROTOR
  • Size: 12.6" x .4" (320mm x 101.6mm)

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Specifications: Solid
  • Rear Brake Rotor Specifications: 12.60" (320mm)
  • Rear Brake Rotor Specifications: 5 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (2:02)
    • Remove the two 15mm bolts from the caliper bracket
    • Pull the caliper off with a flat blade screwdriver
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (3:05)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Preparing the New Brake Pads and Rotors (6:47)
    • Pry off the brake pad shims with a flat blade screwdriver
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply brake grease to the shim-mounting area of the caliper bracket
    • Place the shim onto the caliper bracket
    • Apply grease to the caliper shims
    • Pull out the caliper slides
    • Apply grease to the caliper slides
    • Push the caliper slide into the caliper
  5. step : Installing the Brake Rotor (8:45)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the rotor with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 88 foot-pounds of torque
  6. step : Installing the Brake Pads (10:26)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two 15mm bolts into the caliper
    • Tighten the two 15mm bolts to 23 foot-pounds of torque
  7. step : Reattaching the Wheel (11:33)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Chisel
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 15mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2017 Chrysler 300 (excluding SRT-8) Brake Kit Ceramic Premium Posi Cross Drilled & Slotted Zinc Coated Rear for Models with Solid Rotors Performance Nakamoto
  • 2009-2015 Dodge Challenger Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic for Models with Solid Rotors SE Performance Nakamoto
  • 2009-2017 Dodge Challenger SXT Cross Drilled & Slotted Premium Posi Brake Kit Zinc Coated Ceramic Performance Rear for Models with Solid Rotors Nakamoto
  • 2006-2017 Dodge Charger Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic for Models with Solid Rotors SXT Performance Nakamoto
  • 2006-2017 Dodge Charger SE Cross Drilled & Slotted Premium Posi Brake Kit Zinc Coated Ceramic Performance Rear for Models with Solid Rotors Nakamoto
  • 2005-2008 Dodge Magnum Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic for Models with Solid Rotors SE Performance Nakamoto
  • 2005-2008 Dodge Magnum SXT Cross Drilled & Slotted Premium Posi Brake Kit Zinc Coated Ceramic Performance Rear for Models with Solid Rear Rotors Nakamoto

This part replaces:

  • Nakamoto CD1057, 53021-DSZ
  • Reference Number CD1057
Part #: 1APBS00076

Nakamoto
Brand #: CD1057, 53021-DSZ

How-to Video:

(12:06 min)