Replaces

Brake Kit Nakamoto CD1056, CD1057, 53022-DSZ, 53021-DSZ - 1APBS00314

This performance brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • Front:
    • Vented
    • Size: 12.6" x 1.1" (320mm x 28mm)
  • Rear:
    • Solid
    • Size: 12.6" x .4" (320mm x 10mm)

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:31)
    • Hold the wheel studs with a brake rotor
    • Remove the two 13mm bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (1:55)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Preparing the New Brake Pads and Rotors (3:14)
    • Pry off the brake pad shims with a flat blade screwdriver
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply brake grease to the shim-mounting area of the caliper bracket
    • Place the shim onto the caliper bracket
    • Apply grease to the caliper shims
    • Pull out the caliper slides
    • Apply grease to the caliper slides
    • Push the caliper slide into the caliper
  5. step : Installing the Brake Rotor (5:36)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 70 foot-pounds of torque
  6. step : Installing the Brake Pads (7:05)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two 13mm bolts into the caliper
    • Tighten the two 13mm bolts to 44 foot-pounds of torque
  7. step : Reattaching the Wheel (8:08)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

4.7 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
5
2
0
0
0
Full Brakes & Rotor Set
I ordered a full set of brakes and rotors. I am extremely impressed by the drilled and slotted rotors as well as the ceramic brakes for only the rounded price of $180!
January 28, 2017
Purchased
1 year ago
So far so good
Just installed my rotors and brake pads and what a difference. The only thing I I don't like is that the pads were suppose to be dust free due to being ceramic pads. But, overall great package for the price.
March 10, 2017
Purchased
11 months ago
Excellent Product
I bought this brake set for a 2005 Magnum. It bolted straight in like OEM equipment. I want brakes that will get me out of trouble as fast as the Magnum gets me into trouble! My last set, and two previous ones before, had rotor warping. I bought these because they're slotted and driled and should run cooler. So far they stop my car so smoothly it's deceptive. If I dive into a local Interstate exchange at 80 mph, I slow to 30 mph for a tight ramp in 3-4 seconds with flawless braking, and minimal effort. Sweet! I also drove through a serious downpour with no loss of braking due to the slotting. After 3 weeks of driving, I can't be more pleased.
March 20, 2017
Purchased
11 months ago
Quailty parts
This place is awesome. I received quality parts, will diffidently order again.
June 29, 2017
Purchased
9 months ago
The best
came on time everything fits perfect love the company
June 21, 2017
Purchased
8 months ago
The best on business
You guys are the best, as business, as a team, as a product quality, and the best of all as a customer satisfaction. I’m so happy with you guys that I’m not even thinking on going to other site other than yours. Keep up the hard work. You’re the best...
November 2, 2017
Purchased
4 months ago
Nakamoto Brake and Rotor set
Fit perfect on my 05 Magnum SE 3.5. Does not come with any hardware. Easy to install, so far feels a lot better
November 13, 2017
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 16 answers
Will these fit my 2005 AWD MAGNUM SXT need to replace mine in a serious way?
Cesar H on Sep 19, 2017
BEST ANSWER: These will fit any submodel Dodge Magnum which have the OEM front brake rotors measured at 12.6" diameter.
Are these rotors black?
Jakeg on Sep 18, 2017
BEST ANSWER: No, they are machined steel rotors so they look silvery in color. One observation is if you don't drive your car regularly they will get surface rust if the car is left in the weather.
Does kit include all 4 rotors?
Benilda O on Sep 22, 2017
BEST ANSWER: YES !! EXCELLENT REPLACEMENT !! These rotors really dress up the look of your car. Not sure if that is what you are looking for plus they are Zinc coated. Excellent purchase !! This online store HAS the cheapest pricing for quality goods. All 4 rotors and all pads as shown in picture is what you will get. I don't know if you are going to change out the calipers that hold the pads but I did. I went with the "Power Stops" on both the front and rears. I hope this helped.
Will these fit on a 2006 Chrysler 300C 5.7L V8 Hemi?
Thee300C on Nov 9, 2017
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle, provided your original front rotors were 12.6" Please check this before ordering, as the larger hemi engines may have large rotors associated with them. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Will these work on a 2014 dodge challenger rt?
Jake H on Oct 13, 2017
BEST ANSWER: No, these would only work for models that have the 3.6L engine and a front rotor that the diameter is 12.6".

How-to Video:

(08:37 min)

Tools List:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set



This part replaces:

  • Nakamoto CD1056, CD1057, 53022-DSZ, 53021-DSZ

Vehicle Fit

  • 2005-2016 Chrysler 300 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic for Models with 12.6" (320mm) Diameter Front Rotors Performance Nakamoto
  • 2009-2010 Dodge Challenger Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic V6 3.5L for Models with 12.6" (320mm) Diameter Front Rotors Performance Nakamoto
  • 2011-2016 Dodge Challenger Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic V6 3.6L for Models with 12.6" (320mm) Diameter Front Rotors Performance Nakamoto
  • 2006-2016 Dodge Charger Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic for Models with 12.6" (320mm) Diameter Front Rotors Performance Nakamoto
  • 2005-2008 Dodge Magnum Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic for Models with 12.6" (320mm) Diameter Front Rotors Performance Nakamoto
Part #: 1APBS00314

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD1056, CD1057, 53022-DSZ, 53021-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More