Replaces

Brake Kit Nakamoto CD1041, CD1015, 31329-DSZ, 31328-DSZ - 1APBS00701

Brake Pad Specifications:

  • Professional grade Ceramic Enhanced brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Set of 4
  • Includes both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 6 lug wheels
  • Front 12.6" (320 mm) diameter
  • Rear 12.6" (320mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Rear Brake Rotor Specifications: Solid
  • Front Brake Rotor Specifications: 6 Lug
  • Rear Brake Rotor Specifications: 12.60" (320mm)
  • Front Brake Rotor Specifications: 12.60" (320mm)
  • Rear Brake Rotor Specifications: 6 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:10)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brake Pads (1:27)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads into the caliper with a flat blade screwdriver
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (2:17)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread one lug nuts and strike the rotor from behind with a hammer
  5. step : Preparing the New Brake Pads and Rotors (3:04)
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  6. step : Installing the New Brake Rotor (4:12)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 21mm bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  7. step : Installing the New Brake Pads (5:16)
    • Install the new brake pads into the bracket with the wear indicator on the lower side
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Remove the placeholder lug nut
  8. step : Reattaching the Wheel (6:09)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  9. step : Testing the Brakes (6:37)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Wire Brush
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Cloth Rags

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Great brakes
I bought these brakes for my 2004 Armada and although I have only used them for less than a month, I am extremely pleased with them. Absolutely no noise or dust. Great stopping power. My last brakes were changed at a service center that specializes in brakes and I had nothing but issues. I will buy again for my car and will recommend them to anyone else.
April 24, 2018
Purchased
3 months ago
Brakes
Received pats. Good packing. No damage. Parts not installed, yet.
February 20, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004 Infiniti QX56 Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2005 Infiniti QX56 (Built Before 3/05 Production Date) Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2005 Nissan Armada (Built Before 3/05 Production Date) Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2004 Nissan Pathfinder Armada Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2004 Nissan Titan Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2005 Nissan Titan (Built Before 3/05 Production Date) Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD1041, CD1015, 31329-DSZ, 31328-DSZ
Part #: 1APBS00701

Nakamoto
Brand #: CD1041, CD1015, 31329-DSZ, 31328-DSZ

How-to Video:

(07:06 min)