Replaces

Brake Kit Nakamoto CD1012, CD1083, 8L3Z1102A, 54111 - 1ABFS02790

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Set of 4
  • Includes LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Includes Wheel Bearing
  • Fits 6 Stud Wheels
  • Front 12.99" (330mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:21)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (2:09)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the two 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (3:02)
    • Remove two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread one lug nut and tap the rotor loose with a hammer
  5. step : Installing the Brake Rotor (3:31)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the caliper slides
    • Remove the brake pad slides
    • Clean the slide mounting area with a wire brush
    • Put the bracket back into place
    • Start the two 18mm bolts by hand
    • Tighten the 18mm bolts to 95 foot-pounds of torque
  6. step : Installing the Brake Pads (5:39)
    • Put the brake pad slides into place
    • Push the brake pad slide tabs into place with a hammer and flat blade screwdriver
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Push in the brake pad clips
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten bolts to 25 foot-pounds
  7. step : Reattaching the Wheel (8:42)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut to X foot-pounds
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (9:31)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Large C-Clamp
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 21mm Socket
  • 13mm Socket

4.5 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
3
0
0
0
parts broken in shipping
My front hub came broken, the gear that drives ABS sensor is cracked, not certain whom to find fault with as they came fast and appear to be great product.
January 25, 2018
Purchased
4 months ago
Brake Pad & Rotor Kit Nakamoto
Nakamoto Parts worked well on my truck.
I ordered more Nakamoto parts for my car.
Thanks 1A Auto!
September 13, 2017
Purchased
9 months ago
Rotors and brakes
Shipped and delivered promptly. Had local mechanic install rotors and brakes with no issues. Price was very competive. Overall well pleased with purchase.
September 12, 2017
Purchased
9 months ago
Perfect parts
The parts i ordered for my ford f-150 was Perfect. The customer service was great. The parts came on time. I had someone to install them
June 28, 2017
Purchased
1 year ago
Positive review for brake pad and rotor kit
The kit had everything to do a complete brake job at only a fraction of the cost $270 something. Only other parts needed were the 2 front spindle nuts and blue loctite sealent for the caliper bolts. Spent a total of $300 compared to firestone's quoted price of $700.
June 22, 2017
Purchased
1 year ago
Great set of brake rotors n pads
Truck would shake when stopping and now very smooth with zero shaking. This set is the shit!
January 26, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004 Ford F150 Truck 2 Wheel Drive New Body Style Front & Rear Premium Posi Ceramic Brake Kit for Models with 6 Lug Wheels Nakamoto
  • 2005-2008 Ford F150 Truck 2 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit for Models with 6 Lug Wheels Nakamoto
  • 2006-2008 Lincoln Mark LT 2 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD1012, CD1083, 8L3Z1102A, 54111
Part #: 1ABFS02790


Nakamoto
Brand #: CD1012, CD1083, 8L3Z1102A, 54111

How-to Video:

(10:02 min)