Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      12.01" (305mm)
      Vented
      5 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Zinc Coated
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Performance Brake Rotors
  • Product Line:   Performance
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Brake Pad Specifications:

  • Premium Posi Semi Metallic Brake Pad
  • 4 Piece front brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a match pair
    • Includes both LH (Driver Side) & RH (Passenger Side) Front
  • Fits 5 Stud Wheels
  • Vented
  • 12" (305mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel and Tire (0:56)
    • Loosen the lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
  2. step : Removing the Brake Caliper (1:25)
    • Remove the two 17mm bolts from the brake caliper
    • Pull off the brake caliper
    • Hang the caliper aside with a bungee cord
    • Remove the brake pads
  3. step : Removing the Brake Rotor (2:25)
    • Remove the two 21mm bolts from the caliper bracket
    • Pull off the caliper bracket
    • Pull off the brake rotor
  4. step : Preparing the Brakes (Preparing the Brakes)
    • Tap the brake pads out of the brake caliper
    • Pry the brake caliper clips off the caliper with a flat blade screwdriver
    • Clean the caliper and clips with a wire brush
    • Apply brake grease to the clips
    • Pull out each caliper slide
    • Clean each caliper slide
    • Apply brake grease to each caliper slide
    • Clean the wheel hub surface with a wire brush
    • Apply brake grease to the hub surface
    • Slide the new rotor onto the wheel studs backwards
    • Clean the rotor's contact surface with brake cleaner
  5. step : Installing the Brake Rotor (8:45)
    • Slide the rotor onto the wheel studs
    • Slide an axle nut, if one is available, onto one wheel stud
    • Thread a lug nut onto the wheel stud to hold the rotor in place
    • Put the caliper bracket into place
    • Insert the 21mm bolts into the caliper bracket
  6. step : Installing the Wheel and Tire (11:32)
    • Slide on the wheel
    • Start the lug nuts by hand
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 17mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2010Ford Explorer Ford Explorer Front Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2007-2010Ford Explorer Sport Trac Ford Explorer Sport Trac Front Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2006-2010Mercury Mountaineer Mercury Mountaineer Front Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
Part #: 1APBS00865


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 54143-DSZ, MD1158

How-to Video:

(12:27 min)