Replaces

Brake Kit Nakamoto 19133374, CD1092, S855, 55097 - 1ABCK00040

Brake Pad Specifications:

  • Premium Posi Ceramic Disc Brake Pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Pair
  • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Fits 6 lug wheels
  • 12.99" (330mm) vented

Brake Shoe Specifications:

  • Comes as a set of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) Rear
  • Premium Grade Brake Shoes
  • Direct replacement

Brake Drum Specifications:

  • Comes as a Pair
  • Includes both LH (Driver Side) & RH (Passenger Side) Rear
  • Fits 6 Lug Wheel
  • Direct replacement
  • Built to strict quality control standards

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Step 1: Remove the Wheel (1:56)
    • Remove the lug nut caps and center cap.
    • Loosen the lug nuts on the wheel.
    • Lift the vehicle using jack stands.
    • Remove the lug nuts and pull the wheel off.
    • Turn the wheel so you can access the brakes easily.
  2. step : Step 2: Removing the Brakes (2:16)
    • Remove the two 19mm bolts on the back of the caliper.
    • Lift the caliper up and set it aside.
    • Remove the brake pads.
    • Make sure the slide pins on the back of the bracket slide in and out easily. If not remove them and grease them.
    • Remove the two 18mm bolts on the back of the bracket. Use the breaker bar for extra leverage.
    • Thread the lug nuts on by a few threads.
    • Hit the disk to loosen it. Hit from the front then on the back, turning the rotor and hitting it again.
    • Remove the lug nuts and rotor.
  3. step : Step 3: Installing New Brakes (6:32)
    • Slide the rotor into place.
    • Clean the bracket with a wire brush.
    • Put the bracket back into place and start the bolts.
    • Replace the nuts on the rotor.
    • Tighten the bracket bolts to 90-95ft/lbs.
    • Clean the old slides (if the pads did not come with new slides) with a wire brush then put them back into place.
    • Replace the brake pads. The larger one goes on the back.
    • Put the old inner pad into the caliper and use a C-Clamp to reset the caliper. Tighten the C-clamp to push the pistons back into the caliper.
    • Put the caliper down over the brake pads.
    • Replace the 19mm bolts that hold the caliper to the slides. Tighten to 55-60ft/lbs.
  4. step : Step 4: Replacing the Wheel (9:53)
    • Straighten the wheel.
    • Replace the wheel and tire.
    • Thread the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a crossing pattern.
    • Replace the caps and trim.
  5. step : Step 5: Prep the Brakes (10:39)
    • Pump the brakes a few times until the pedal is firm.

Tools needed for replacement:

    General Tools

  • Chisel
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 22mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(11:06 min)

Tools List:

    General Tools

  • Chisel
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 22mm Socket



This part replaces:

  • Hollander 533-00111
  • Hollander 530-02186
  • OE # 19133374
  • Reference Number CD1092
  • Reference Number 55097
  • Reference Number 80118
  • Reference Number S855
  • Nakamoto 19133374, CD1092, S855, 55097

Vehicle Fit

  • 2005-2006 Chevy Silverado 1500 Front & Rear Premium Posi Ceramic Brake Kit for Models with 6 Lug Wheels Nakamoto
  • 2007 Chevy Silverado 1500 Classic Front & Rear Premium Posi Ceramic Brake Kit for Models with 6 Lug Wheels Nakamoto
  • 2005-2006 GMC Sierra 1500 Front & Rear Premium Posi Ceramic Brake Kit for Models with 6 Lug Wheels Nakamoto
  • 2007 GMC Sierra 1500 Classic Front & Rear Premium Posi Ceramic Brake Kit for Models with 6 Lug Wheels Nakamoto
Part #: 1ABCK00040

Out of Stock

Nakamoto
Brand #: 19133374, CD1092, S855, 55097

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More