Replaces

Brake Kit Front Raybestos SGD727C, 56655R - RABFS00070

RAYBESTOS SERVICE GRADE FRONT BRAKE PAD & ROTOR KIT: SGD727C, 56655R

The Raybestos® brand is a name firmly rooted in a proud tradition of innovative product design and manufacturing excellence. The premier brand of replacement products since 1902, the Raybestos® brand name has changed the way people think about brake products and brake performance with continual innovations and dedication to quality.

Brake Pad Specifications:

  • Brand New Raybestos Service Grade Front Brake Pad Set
  • Material: Ceramic
  • Shims, slots and chamfers like OE
  • Engineered for safe, quiet braking
  • Replaces dealer part numbers: 171622, 18024383, 18025186, 18026185, 18026186, 18044437

Brake Rotor Specifications:

  • Brand New Raybestos Brake Rotors
  • Comes as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • Fits 5 Stud Wheels
  • Vented
  • 10.94" Diameter
  • Replaces dealer part numbers: 12062056, 19152703

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:41)
    • Remove the lug nut covers
    •  
    • Remove the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
  2. step : Removing the Brake Pads (0:58)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Remove two 12mm bolts from the brake caliper
    • Push the caliper pistons in using a large C-clamp on the brake pad
    • Pull the caliper aside
    • Pull the brake pads off by hand
    • Clean the slides with a wire brush
  3. step : Inspecting the Brakes (2:23)
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  4. step : Removing the Brake Rotor (2:41)
    • Remove two 13mm bolts from the brake caliper bracket with a breaker bar or a ratchet and pipe
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:35)
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
    • Clean the brake pad slides with a wire brush
    • Put the bracket back into place, start the 13mm bolts by hand
    • Tighten the 13mm bolts to 65 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:55)
    • Install the new brake pads into the bracket with the tab on the rear side
    • Put the caliper on
    • Thread the 12mm bolts by hand
    • Tighten the 12mm bolts to between 15-18 foot-pounds
    • Unthread the place-holder lug nut
  7. step : Reattaching the Wheel (6:13)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90-100 foot-pounds in a crossing or star pattern
    • Reattach the hub cap, aligning the valve stem
    • Reattach the lug nut covers
  8. step : Testing the Brakes (6:59)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Large C-Clamp
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 19mm Socket
  • 12mm Socket
  • 13mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Chevy Classic Front Brake Kit Ceramic Raybestos SGD727C, 56655R
  • 1997-2003 Chevy Malibu Front Brake Kit Ceramic Raybestos SGD727C, 56655R
  • 1999-2004 Olds Alero Front Brake Kit Ceramic Raybestos SGD727C, 56655R
  • 1997-1999 Olds Cutlass Front Brake Kit Ceramic Raybestos SGD727C, 56655R

This part replaces:

  • Raybestos SGD727C, 56655R
Only 1 left in stock
Part #: RABFS00070



Raybestos
Brand #: SGD727C, 56655R

How-to Video:

(07:27 min)