Replaces

Brake Kit Front Raybestos SGD1092C, 580279R - RABFS00001

RAYBESTOS SERVICE GRADE FRONT BRAKE PAD & ROTOR KIT: SGD1092C, 580279R

The Raybestos® brand is a name firmly rooted in a proud tradition of innovative product design and manufacturing excellence. The premier brand of replacement products since 1902, the Raybestos® brand name has changed the way people think about brake products and brake performance with continual innovations and dedication to quality.

Brake Pad Specifications:

  • Brand New Raybestos Service Grade Front Brake Pad Set
  • Material: Ceramic
  • Shims, slots and chamfers like OE
  • Engineered for safe, quiet braking
  • Replaces dealer part numbers: 25852957, 89059119

Rotor Specifications:

  • Brand New Raybestos Brake Rotors
  • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Vented
  • 6 wheel stud holes
  • 13" Diameter
  • Replaces dealer part numbers: 1770918, 25819670, 25819670

Note: For 2007 Silverado and Sierra Pickup trucks, Clarification of Classic vs New Body Styles is as follows:

  • Classic Body Style has a crease in the center of the door skin
  • New Body Style has a smooth door skin that does not have a crease

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Step 1: Remove the Wheel (1:56)
    • Remove the lug nut caps and center cap.
    • Loosen the lug nuts on the wheel.
    • Lift the vehicle using jack stands.
    • Remove the lug nuts and pull the wheel off.
    • Turn the wheel so you can access the brakes easily.
  2. step : Step 2: Removing the Brakes (2:16)
    • Remove the two 19mm bolts on the back of the caliper.
    • Lift the caliper up and set it aside.
    • Remove the brake pads.
    • Make sure the slide pins on the back of the bracket slide in and out easily. If not remove them and grease them.
    • Remove the two 18mm bolts on the back of the bracket. Use the breaker bar for extra leverage.
    • Thread the lug nuts on by a few threads.
    • Hit the disk to loosen it. Hit from the front then on the back, turning the rotor and hitting it again.
    • Remove the lug nuts and rotor.
  3. step : Step 3: Installing New Brakes (6:32)
    • Slide the rotor into place.
    • Clean the bracket with a wire brush.
    • Put the bracket back into place and start the bolts.
    • Replace the nuts on the rotor.
    • Tighten the bracket bolts to 90-95ft/lbs.
    • Clean the old slides (if the pads did not come with new slides) with a wire brush then put them back into place.
    • Replace the brake pads. The larger one goes on the back.
    • Put the old inner pad into the caliper and use a C-Clamp to reset the caliper. Tighten the C-clamp to push the pistons back into the caliper.
    • Put the caliper down over the brake pads.
    • Replace the 19mm bolts that hold the caliper to the slides. Tighten to 55-60ft/lbs.
  4. step : Step 4: Replacing the Wheel (9:53)
    • Straighten the wheel.
    • Replace the wheel and tire.
    • Thread the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a crossing pattern.
    • Replace the caps and trim.
  5. step : Step 5: Prep the Brakes (10:39)
    • Pump the brakes a few times until the pedal is firm.

Tools needed for replacement:

    General Tools

  • Chisel
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 22mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007 Cadillac Escalade Front Brake Kit Ceramic Raybestos SGD1092C, 580279R
  • 2007 Cadillac Escalade ESV Front Brake Kit Ceramic Raybestos SGD1092C, 580279R
  • 2007 Cadillac Escalade EXT Front Brake Kit Ceramic Raybestos SGD1092C, 580279R
  • 2007-2008 Chevy Avalanche 1500 Front Brake Kit Ceramic Raybestos SGD1092C, 580279R
  • 2005 Chevy Silverado 1500 Front Brake Kit Ceramic for Models with Rear Drum Brakes Raybestos SGD1092C, 580279R
  • 2007 Chevy Silverado 1500 Classic Front Brake Kit Ceramic for Models with Rear Drum Brakes Raybestos SGD1092C, 580279R
  • 2007 Chevy Suburban 1500 Front Brake Kit Ceramic Raybestos SGD1092C, 580279R
  • 2007 Chevy Tahoe Front Brake Kit Ceramic Raybestos SGD1092C, 580279R
  • 2005-2006 GMC Sierra 1500 Front Brake Kit Ceramic for Models with Rear Drum Brakes Raybestos SGD1092C, 580279R
  • 2007 GMC Sierra 1500 Classic Front Brake Kit Ceramic for Models with Rear Drum Brakes Raybestos SGD1092C, 580279R
  • 2007 GMC Yukon Front Brake Kit Ceramic Raybestos SGD1092C, 580279R
  • 2007 GMC Yukon XL 1500 Front Brake Kit Ceramic Raybestos SGD1092C, 580279R

This part replaces:

  • Raybestos SGD1092C, 580279R
Only 1 left in stock
Part #: RABFS00001


Raybestos
Brand #: SGD1092C, 580279R

How-to Video:

(11:06 min)