Replaces

Brake Kit Front Nakamoto PC7950CD1047, 54123 - 1ABFS01684

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 4 Piece Front Brake Pad Set
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 5L8Z1125AA, 5U2Z1V125N, ZZDL3325X, 5L8Z 1125 AA, 5U2Z 1V125 N, ZZDL 3325 X
  • Direct replacements
  • 11.92" Diameter
  • Built to strict quality control standards

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Front or Rear Location: Front
  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 11.92" (303mm)
  • Front Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (4:33)
    • Remove bolts from the brake caliper
    • Pry the caliper from the pads
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
  3. step : Removing the Brake Rotor (5:25)
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (6:30)
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Brake Rotor (8:19)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the bolts by hand
    • Torque the bolts
  6. step : Installing the New Brake Pads (9:18)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket
    • Apply grease to the back of the pads
    • Put the caliper on
    • Thread bolts by hand
    • Torque the caliper bolts
  7. step : Reattaching the Wheel (10:30)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Safety Glasses
  • Brake Parts Cleaner
  • Gloves

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2007 Ford Escape Front Brake Kit Premium Posi Ceramic for Models with 4 Wheel Disc Brakes 4 Wheel Drive All Wheel Drive V6 3.0L Nakamoto
  • 2008-2012 Ford Escape Front Brake Kit Premium Posi Ceramic 4 Wheel Drive Nakamoto
  • 2005-2006 Mazda Tribute Front Brake Kit Premium Posi Ceramic for Models with 4 Wheel Disc Brakes 4 Wheel Drive All Wheel Drive V6 3.0L Nakamoto
  • 2008-2011 Mazda Tribute Front Brake Kit Premium Posi Ceramic 4 Wheel Drive Nakamoto
  • 2005-2007 Mercury Mariner Front Brake Kit Premium Posi Ceramic for Models with 4 Wheel Disc Brakes 4 Wheel Drive All Wheel Drive V6 3.0L Nakamoto
  • 2008-2011 Mercury Mariner Front Brake Kit Premium Posi Ceramic 4 Wheel Drive (excluding Hybrid Models) Nakamoto

This part replaces:

  • Nakamoto PC7950CD1047, 54123
Part #: 1ABFS01684


Order must be placed by 4pm ET
Nakamoto
Brand #: PC7950CD1047, 54123

How-to Video:

(11:18 min)