This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Includes shims
  • Direct replacement
  • Ceramic Enhanced Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 40206-55F03, 40206-73L01, 40206-7J101, 4020655F03, 4020673L01, 402067J101
  • Direct replacements
  • 11" (280 mm) Diameter Vented Rotors

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:57)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:15)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicators
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (2:02)
    • Remove the two 14mm bolts from the brake caliper
    • Pry the caliper off with a flat blade screwdriver
    • Pull the caliper aside
    • Pull the brake pads off
  4. step : Removing the Brake Rotor (2:40)
    • Check that the caliper slides move freely
    • If the slides do not move freely, apply penetrating oil
    • Twist the slide out with water pump pliers and a hammer
    • Twist the slide out with a pair of vise-grip pliers
    • Remove the two 19mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (4:29)
    • Slide the rotor on
    • Thread one lug nut by hand to hold the rotor in place
    • Put the bracket back into place
    • Start the two 19mm bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
    • Clean the caliper slides with a wire brush
    • Apply penetrating oil to the slides
    • Apply bearing grease to the slides
    • Insert the caliper slides
  6. step : Installing the New Brake Pads (5:41)
    • Use a large C-clamp to push the pistons back into the caliper
    • Install the new brake pads into the bracket with the wear indicator tab on the upper side
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten the two 14mm bolts to 20 foot-pounds
    • Pull the wheel straight
    • Remove the place holder lug nut
  7. step : Reattaching the Wheel (7:43)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 - 110 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (8:16)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Slip-Joint Pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket
  • 19mm Socket

3.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
1
Great Pads and Rotors. Fast service, Terrific prices.
Purchased these brake pads and rotors for my Nissan. I received the usual stellar service and fast shipping. The parts were an exact fit. (They are aftermarket, not OEM) No issues at all whatsoever. This was not my first order from this company. They are my first choice when shopping car parts online. I highly recommend this dealer.
March 22, 2017
Purchased
1 year ago
What is a first time user I'm impressed.
as a first-time user I found that they were fast accurate and had a very navigational website things were easy to be found easy setup for payment and your shipping and receiving was made really easy for you all in all as a first time user of 1aauto I would recommend them to other friends and family members and half so keep up the good work guys hope this makes you improve on what you already seem to be doing well thank you
February 19, 2018
Purchased
2 months ago
MISSING PADS
The rotors are fine. But as I was going to install the kit, which was SUPPOSED to include pads.....they were not there. I had to go to my nearest auto parts store to get pads which cost an additional $30. Defeats the purpose of buying a whole kit.
September 12, 2017
Purchased
7 months ago
Response from 1A Auto
We are sorry to hear that the pads were not received. In attempt to resolve this situation, we have requested a refund to reflect to your account for these missing pads. Please contact us at 1-888-844-3393 if you have any further questions.
September 12, 2017
Alex PStaff
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2001 Infiniti G20 Front Premium Posi Ceramic Brake Kit Nakamoto
  • 1993-2001 Nissan Altima Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2000-2001 Nissan Sentra L4 2.0L Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2002-2003 Nissan Sentra L4 2.5L Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2004-2006 Nissan Sentra (excluding Spec V) SE-R L4 2.5L without Brembo Calipers Front Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD653, 31057
Part #: 1ABFS01395



Nakamoto
Brand #: CD653, 31057

How-to Video:

(08:45 min)