This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacements
  • Fits 5 Lug wheels
  • 11.65" Diameter Rotor
  • Replaces dealer part numbers: 25872802, 15856665, 22705375, 25797350

This front brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:42)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:04)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:24)
    • Remove 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad brackets
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (2:07)
    • Remove the 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (2:30)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on
    • Remove the brake pad slides
    • Put the bracket back into place
    • Start the 15mm bolts by hand
    • Tighten the bolts to 65 foot-pounds of torque
  6. step : Installing the New Brake Pads (3:54)
    • Clean the brake pad brackets with a wire brush
    • Push the brackets onto the caliper bracket
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts the 14mm by hand
    • Tighten bolts to 35 foot-pounds
  7. step : Reattaching the Wheel (5:22)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  8. step : Testing the Brakes (5:58)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • White Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Brakes
Great products and super fast shipping and well priced!
April 19, 2018
Purchased
1 month ago
5 stars!
Great products! And the cheapest price around! Highly recommended
April 17, 2018
Purchased
2 months ago
Perfect Fit
Very satisfied. Fit my vehicle perfectly and works great!
July 22, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2008 Chevy HHR Front Premium Posi Ceramic Brake Kit for Models with 4 Wheel Disc Brakes without Active Brake Control Nakamoto
  • 2007 Chevy Malibu Premium Posi Brake Kit Front Ceramic for Models with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto
  • 2008 Chevy Malibu Front Premium Posi Ceramic Brake Kit V6 3.6L with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto
  • 2008 Chevy Malibu Front Premium Posi Ceramic Brake Kit L4 2.4L with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto
  • 2009-2012 Chevy Malibu Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2009-2010 Pontiac G5 GT Front Premium Posi Ceramic Brake Kit for Models with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto
  • 2007 Pontiac G6 Front Premium Posi Ceramic Brake Kit for Models with ABS Brakes & RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto
  • 2008 Pontiac G6 Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2009-2010 Pontiac G6 Front Premium Posi Ceramic Brake Kit for Models without RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto
  • 2007-2009 Saturn Aura Front Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD1160, 55093
Part #: 1ABFS00433


Nakamoto
Brand #: CD1160, 55093

How-to Video:

(06:18 min)