Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

These brake drums are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) RH (Passenger Side) REAR
  • Replaces dealer part numbers: 40206U4800, 40206 U4800, 432061E410, 43206 1E410, 432069E000, 43206 9E000
  • Direct replacements
  • Fits 4 stud wheels

These brake drums make great replacements and have excellent value over the price of a dealer brake drums.

Part Details

  • Front or Rear Location: Rear
  • Quantity: Pair

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheels (1:10)
    • Use a 19mm socket to remove the lug nut covers.
    • Loosen the lug nuts.
    • Raise the vehicle.
    • Remove the lug nuts and the wheel.
  2. step : Removing the Brakes (1:39)
    • Spray them with penetrating oil.
    • Remove the locking tabs around the bolts.
    • Hit the brake on the front with a hammer to loosen it. Pry with a screwdriver once loosened.
    • Use vise-grips to lock on to the spring. Pull the spring out and down and remember what spring goes where.
    • Remove the other spring the same way as the last.
    • Pull the lever down and pull the lever across from it off.
    • Hold the back of the pin that holds on the shoes. Using the vise-grips push and twist the other side. Do the same with the other pin.
    • Take the brake shoes off.
    • Make sure there is not a leak near the wheel cylinder.
  3. step : Taking the Brakes Apart (6:56)
    • Separate the shoes
    • Pull the adjuster from the shoes.
    • Clean the threads on the adjuster and coat with anti-seize.
    • Make sure it spins easily.
  4. step : Preparing the New Brakes (8:07)
    • Match up the old springs with the news springs.
    • The larger shoe is the rear shoe.
    • Attach the shoes with the spring and adjuster.
    • Put anti-seize on all the places the shoes contact.
  5. step : Installing New Brakes (9:16)
    • Put the emergency brake bracket into the triangle slot on the brake shoes.
    • Put the shoes on to the wheel
    • Put the pins in through the back of the shoes.
    • Replace the spring using the vise-grips to pull it into place.
    • Put the adjusting arm with the new cup into place. Reinsert the pin
    • Attach the shorter spring to the lever.
    • Put the opposite lever into place.
    • Slide the emergency brake separator back into place.
    • Reinsert the remaining springs using the vise-grips.
    • Put the small spring back under the larger lever
    • Replace the drum. Use the adjuster to expand the shoes so that it will fit properly. You want the drum to slide on with a little drag.
  6. step : Replacing the Wheel (15:01)
    • Put the wheel into place.
    • Thread the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft/lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Large Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 19mm Socket

  • Specialty Tools

  • Vise-Grips

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1968-1973Datsun 510 Datsun 510 Rear Brake Drum Pair
1978-1981Datsun 510 Datsun 510 Rear Brake Drum Pair
1973-1976Datsun 610 Datsun 610 Rear Brake Drum Pair
1974-1977Datsun 710 Datsun 710 Rear Brake Drum Pair
1977-1984Datsun 810-Maxima Datsun 810-Maxima Rear Brake Drum Pair
1993-2001Nissan Altima Nissan Altima Rear Brake Drum Pair
1990Nissan Axxess Nissan Axxess Rear Brake Drum Pair
1987-1988Nissan Stanza Nissan Stanza Rear Brake Drum Pair
1990-1992Nissan Stanza Nissan Stanza Rear Brake Drum Pair
Part #: 1ABDS00251


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(15:41 min)