Replaces

Brake Caliper Raybestos Opti-Cal FRC11702N - RABCR00024

Specifications:

  • Brand New Brake Caliper
  • Fits LH (Driver Side) or RH (Passenger Side) Front (per application)
  • OE-matched design and specifications
  • Engineered to meet or exceed OE performance and durability
  • All new casting and parts NO CORE required

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:31)
    • Hold the wheel studs with a brake rotor
    • Remove the two 13mm bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (1:55)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Preparing the New Brake Pads and Rotors (3:14)
    • Pry off the brake pad shims with a flat blade screwdriver
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply brake grease to the shim-mounting area of the caliper bracket
    • Place the shim onto the caliper bracket
    • Apply grease to the caliper shims
    • Pull out the caliper slides
    • Apply grease to the caliper slides
    • Push the caliper slide into the caliper
  5. step : Installing the Brake Rotor (5:36)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 70 foot-pounds of torque
  6. step : Installing the Brake Pads (7:05)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two 13mm bolts into the caliper
    • Tighten the two 13mm bolts to 44 foot-pounds of torque
  7. step : Reattaching the Wheel (8:08)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Chrysler 300 All Wheel Drive Brake Caliper Passenger Side Front V8 5.7L Raybestos Opti-Cal FRC11702N
  • 2005-2010 Chrysler 300 All Wheel Drive Brake Caliper Passenger Side Front V6 3.5L Raybestos Opti-Cal FRC11702N
  • 2005-2010 Chrysler 300 Rear Wheel Drive Brake Caliper Front for Models with Dual Piston Calipers V8 5.7L Driver Side Raybestos Opti-Cal FRC11702N
  • 2005-2010 Chrysler 300 Rear Wheel Drive Brake Caliper Front for Models with Dual Piston Calipers V6 3.5L Driver Side Raybestos Opti-Cal FRC11702N
  • 2011 Chrysler 300 All Wheel Drive Brake Caliper Passenger Side Front V8 5.7L Raybestos Opti-Cal FRC11702N
  • 2011 Chrysler 300 Rear Wheel Drive Brake Caliper Front V8 5.7L Driver Side Raybestos Opti-Cal FRC11702N
  • 2009-2011 Dodge Challenger Brake Caliper Front V8 5.7L Driver Side Raybestos Opti-Cal FRC11702N
  • 2006-2010 Dodge Charger excluding SRT-8 Brake Caliper Front for Models with Dual Piston Calipers Driver Side Raybestos Opti-Cal FRC11702N
  • 2007 Dodge Charger All Wheel Drive Brake Caliper Passenger Side Front V6 3.5L Raybestos Opti-Cal FRC11702N
  • 2007 Dodge Charger All Wheel Drive Brake Caliper Passenger Side Front V8 5.7L Raybestos Opti-Cal FRC11702N
  • 2007 Dodge Charger Rear Wheel Drive Brake Caliper Front V6 3.5L Driver Side Raybestos Opti-Cal FRC11702N
  • 2007 Dodge Charger Rear Wheel Drive Brake Caliper Front V8 5.7L Driver Side Raybestos Opti-Cal FRC11702N
  • 2011 Dodge Charger Rear Wheel Drive Brake Caliper Front for Models with Dual Piston Calipers V8 5.7L Driver Side Raybestos Opti-Cal FRC11702N
  • 2011 Dodge Charger All Wheel Drive Brake Caliper Passenger Side Front V8 5.7L Raybestos Opti-Cal FRC11702N
  • 2005-2008 Dodge Magnum All Wheel Drive Brake Caliper Passenger Side Front V6 3.5L Raybestos Opti-Cal FRC11702N
  • 2005-2008 Dodge Magnum All Wheel Drive Brake Caliper Passenger Side Front V8 5.7L Raybestos Opti-Cal FRC11702N
  • 2005-2008 Dodge Magnum Rear Wheel Drive Brake Caliper Front for Models with Dual Piston Calipers V6 3.5L Driver Side Raybestos Opti-Cal FRC11702N
  • 2005-2008 Dodge Magnum Rear Wheel Drive Brake Caliper Front for Models with Dual Piston Calipers V8 5.7L Driver Side Raybestos Opti-Cal FRC11702N

This part replaces:

  • Raybestos Opti-Cal FRC11702N
Only 2 left in stock
Part #: RABCR00024


Raybestos Opti-Cal
Brand #: FRC11702N

How-to Video:

(08:37 min)