Brake Pad Specifications:

  • Premium Posi Ceramic Disc Brake Pads
  • 4 Piece Front Brake Pad Set
  • Pad Length: 7 Inches
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • Fits 6 lug wheels
  • 12" (304mm) diameter
  • Vented

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • Includes ABS sensor, wire, and correct connector
  • Fits 6 lug wheel
  • Wheel studs already installed
  • Direct replacement
  • Built to strict quality control standard

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:20)
    • Remove the 18mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Brake Rotor (2:54)
    • Spray the 21mm bolts with penetrating oil if rusted
    • Remove the 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (5:05)
    • Clean the rotor with brake parts cleaner
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clip the brake pad slides to the caliper bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
  5. step : Installing the New Brake Rotor (6:55)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  6. step : Installing the New Brake Pads (7:48)
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the bolts by hand
    • Tighten the bolts to 100 foot-pounds
  7. step : Reattaching the Wheel (9:25)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket
  8. step : Testing the Brakes (9:53)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 21mm Socket
  • 22mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Nice kit
Was going to replace a bad abs sensor and found out my wheel bearing was bad. it was nice to get a whole kit since removing the breaks and rotors to replace wheel bearings. Nice to know the front end part will all be taken care of.
January 10, 2018
Purchased
3 months ago
Very good kit ! Very happy customer.
The parts all fit perfectly. Everything went together pretty easy. Overall, I am extremely satisfied with the parts the service and the whole transaction beginning with the how to video.
I watched the video a full week and a half before attempting the repair and was able to accomplish it without reviewing the video a second time.
July 7, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Cadillac Escalade 2 Wheel Drive Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2002-2006 Chevy Avalanche 1500 2 Wheel Drive Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2003-2008 Chevy Express 1500 Van 2 Wheel Drive Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2003-2005 Chevy Express 2500 Van 2 Wheel Drive 7300LB GVW 6 Lug Wheels Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 1999-2000 Chevy Silverado 1500 2 Wheel Drive 6 Lug Wheels Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2001-2004 Chevy Silverado 1500 2 Wheel Drive 6 Lug Wheels Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2005-2006 Chevy Silverado 1500 SS 4 Wheel Disc Brakes 6 Lug Wheels Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2000-2006 Chevy Suburban 1500 2 Wheel Drive Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2000 Chevy Tahoe V8 4.8L 2 Wheel Drive (excluding Z71 Models) Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2001-2006 Chevy Tahoe 2 Wheel Drive Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2003-2008 GMC Savana 1500 Van 2 Wheel Drive Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2003-2005 GMC Savana 2500 Van 2 Wheel Drive 7300LB GVW 6 Lug Wheels Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 1999-2000 GMC Sierra 1500 2 Wheel Drive 6 Lug Wheels Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2001-2004 GMC Sierra 1500 2 Wheel Drive 6 Lug Wheels Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2005 GMC Sierra 1500 4 Wheel Disc Brakes 6 Lug Wheels Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2001-2006 GMC Yukon 2 Wheel Drive Front Premium Posi Ceramic Brake & Wheel Bearing Kit
  • 2000-2006 GMC Yukon XL 1500 2 Wheel Drive Front Premium Posi Ceramic Brake & Wheel Bearing Kit

This part replaces:

  • Reference Number 515053
  • Dorman 4110353
  • Hollander 538-01479, 538-01529, 538-1761
  • Hollander 530-02040
  • OE # 15233311
  • OE # 18048101
Part #: 1ABMS00074

Out of Stock

How-to Video:

(10:18 min)