Brake Pad Specifications:

  • Premium Posi Ceramic Disc Brake Pads
  • 4 Piece Front Brake Pad Set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 6 lug wheels
  • 12.99" (329mm) diameter
  • Vented

Wheel Bearing & Hub Assembly Specifications:

  • Fits Both LH (Driver Side) & RH (Passenger Side) Front
  • 3 Bolt Triangular Flange
  • Fits 6 Lug Wheel
  • New wheel studs already installed
  • ABS (Anti-Lock Brakes) Sensor is included
  • Fits New Body Style Models only
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:07)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:25)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:47)
    • Remove the two 19mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (2:44)
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, douse the back side with penetrating oil and use two M10 bolts to press the rotor off
  5. step : Installing the New Brake Rotor (4:08)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Clean the caliper bracket with a wire brush
    • Remove the brake pad slides
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  6. step : Installing the New Brake Pads (5:32)
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Grease the brake pads
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 50 foot-pounds of torque
  7. step : Reattaching the Wheel (7:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:53)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Fluid
  • Mineral Spirits
  • Brake Parts Cleaner
  • Rust Penetrant
  • White Grease
  • M10 x 7cm bolts

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 22mm Socket
  • 19mm Socket
  • 18mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Great kit
Everything you need and installation was easy. Nice smooth brakes now and fresh new hubs. Only thing that would make it better would be new caps for the hubs since the old ones bit it removing them.

This was so much cheaper than what a shop wanted to charge for doing only 1 hub assembly. I paid half what they wanted and did BOTH hubs PLUS the rotors and pads.
August 19, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:17 min)

Tools List:

    General Tools

  • Wire Brush
  • Jack Stands
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Fluid
  • Mineral Spirits
  • Brake Parts Cleaner
  • Rust Penetrant
  • White Grease
  • M10 x 7cm bolts

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 22mm Socket
  • 19mm Socket
  • 18mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver



This part replaces:

  • Reference Number CD1367
  • Hollander 538-00128
  • OE # 25918329, 10393171

Vehicle Fit

  • 2008-2013 Cadillac Escalade 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
  • 2008-2013 Cadillac Escalade ESV 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
  • 2008-2013 Cadillac Escalade EXT 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
  • 2008-2013 Chevy Avalanche 1500 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
  • 2008-2013 Chevy Silverado 1500 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
  • 2009-2013 Chevy Silverado 1500 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit for Models with RPO Code J92 (4 Wheel Disc Brakes & ABS) Performance
  • 2008-2013 Chevy Suburban 1500 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
  • 2008-2013 Chevy Tahoe excluding Police Package 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
  • 2010-2013 Chevy Tahoe 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit for Models with RPO Code PPV (Police Package Vehicle) Performance
  • 2008-2013 GMC Sierra 1500 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
  • 2008-2013 GMC Yukon 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
  • 2008-2013 GMC Yukon XL 1500 4 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
Part #: 1ABMS00072

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More