This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • 4 Piece FRONT Brake Pad Set
  • No core charge
  • Direct replacement
  • Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 18016200, 19122180
  • No core charge
  • Fit 5 Stud Wheels

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces delaer part number: 7470014
  • Built to strict quality control standards

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:13)
    • While your car is still on the ground, use your socket to loosen and remove the center hub nut.
    • Loosen your lug nuts and jack up the car.
    • Remove the lug nuts with your socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:25)
    • Raise and secure your car.
    • Remove the two bolts, pull off the caliper and then the rotor.
  3. step : Remove hub (3:50)
    • Remove the T55 torx bolts.
    • Spray the backs with penetrating oil to help.
    • Separate the hub from the backing plate.
    • Clean up with a wire brush.
    • Remove the hub nut.
    • Tap the axle with a hammer to loosen it and then use the hammer to hammer the hub off the axle.
  4. step : Replace hub (5:20)
    • Clean up the steering knuckle with a wire brush.
    • Use some anti-seize or penetrating oil to make future hub replacement easier.
    • Put position your new 1A Auto hub in place.
    • Secure the T55 torx bolts and nuts and tighten to 60 ft lbs.
    • Put the hub nut back on.
  5. step : Put brakes and wheel back on (7:40)
    • For more detailed instructions on reassembling the brakes consult our other videos.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten the hub nut to 144 ft lbs.
    • Tighten the lugs to 75 ft lbs.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 30mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

5.0 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
6
0
0
0
0
Quality and a GREAT Price!
The rotors, pads and bearing all fit perfect, and the quality of the rotors and pads are higher than I expected at this price. I didn't expect the amount of satisfaction I would realize on thisrepair, but I will say it is better than anything I could have purchased for twice the price, locally. My only issues were, the spindle nuts seemed to cross-thread, they are a different socket size than the originals, and the extra parts included made me wonder if there was an update, or I was forgetting something. Instructions describing those parts would have been great. All in all, I am one happy customer, and recommend anyone changing their bearings to consider this kit, as the rotors are NOT low-end warping junk, and the pads are MUCH better than mid-grade, and the price is outstanding. If you're ripping it apart for the bearings... just do the brakes, and consider it the cheapest high-end brake job you'll ever get! (Be sure to clean and lube your caliper mount bolts and the piston, brake job or not).
January 29, 2017
Purchased
1 year ago
Bearings and brakes
I purchased bearings and brakes for my daughters car and they fit perfectly and the growling and squeeling sounds are gone!! I would recommend them to anyone who needs inexpensive parts to repair their vehicle.
March 22, 2017
Purchased
11 months ago
Brakes rotors Bering kit
Awsom products got me to flordia and back to. Ct no problem. THANKS
February 22, 2017
Purchased
1 year ago
Hub bearing package
The parts we ordered was a match nad didnt have to send anything back. Shiping was prompt. Thank you.
September 12, 2017
Purchased
5 months ago
Great quality parts and 3 days and parts were at home thanks again fina order muffler and water jump doin
October 5, 2017
Purchased
5 months ago
Great parts
Awesome prices, fast service. Parts were correct and fit perfectly.
November 18, 2017
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 5 answers
My car starts to make a grinding and rumble sound after 10 mph what can I do?
Etan M on May 27, 2017
BEST ANSWER: I would start with wheel bearings, often hard to determine which side is culprit so if budget allows replace both sides. If only wanting to replace 1 then pick a side and replace wheel bearing assemble with new one and hold on to old one and if no change in noice than put recently changed assembly onto other side.

How-to Video:

(09:46 min)

Tools List:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 30mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket




Vehicle Fit

  • 1990 Buick Skylark Front Brake & Wheel Bearing Kit for Models with RPO Code WS6 (Performance Package) Ceramic
  • 1991-1995 Buick Skylark Front Brake & Wheel Bearing Kit Ceramic
  • 1992-1995 Chevy Beretta Front Brake & Wheel Bearing Kit Ceramic
  • 1992-1995 Chevy Cavalier Front Brake & Wheel Bearing Kit Ceramic
  • 1992-1995 Chevy Corsica Front Brake & Wheel Bearing Kit Ceramic
  • 1992-1995 Olds Achieva Front Brake & Wheel Bearing Kit Ceramic
  • 1990 Olds Cutlass Calais Front Brake & Wheel Bearing Kit for Models with RPO Code WS6 (Performance Package) Ceramic
  • 1991 Olds Cutlass Calais Front Brake & Wheel Bearing Kit Ceramic
  • 1990 Pontiac Grand Am Front Brake & Wheel Bearing Kit for Models with RPO Code WS6 (Performance Package) Ceramic
  • 1991-1995 Pontiac Grand Am Front Brake & Wheel Bearing Kit Ceramic
  • 1992-1994 Pontiac Sunbird Front Brake & Wheel Bearing Kit Ceramic
  • 1995 Pontiac Sunfire Front Brake & Wheel Bearing Kit Ceramic
Part #: 1ABMS00024

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More