This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • Fits FRONT Rotors
  • 4 Piece Brake Pad Set
  • No core charge
  • Includes shims

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 15054096, 18060665, 8180606650, 81806 06650, 18060665, 25826103, 8258261030 
  • Fit 6 Stud Wheels
  • 12.8" Diameter Vented Rotors

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 12413037, 15130858
  • Includes lug nut studs already installed, ABS Sensors, and ABS Sensor Wire Harnesses
  • 3 Bolt Flanges
  • Built to strict quality control standards

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Precision Engineered:

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials:

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement:

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Ceramic
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Front Brake Rotor Specifications: 12.80" (325mm)
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 6 Lug
  • Kit Includes: (2) Front Hub Assemblies

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel and tire (1:18)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:07)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 13mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your 18mm socket to remove the brackets.
  3. step : Remove brake disk (4:13)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (4:42)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:10)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 90 ft lbs.
    • Reinstall the ABS harness.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:50)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 100-120 ft lbs
    • Hub nut is 103 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Rubber Mallet
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant
  • Wire Ties

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket
  • 35mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Fit perfectly and went together just as it should.
Fit perfectly and went together just as it should. Never disappointed by 1AAuto.com
January 8, 2018
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2004-2005Buick Rainier Buick Rainier 7 Passenger Front Premium Posi Ceramic Brake & Wheel Bearing Kit
2003-2005Chevy SSR Chevy SSR Front Premium Posi Ceramic Brake & Wheel Bearing Kit
2002-2005Chevy Trailblazer EXT Chevy Trailblazer EXT Front Premium Posi Ceramic Brake & Wheel Bearing Kit
2005GMC Envoy GMC Envoy V8 5.3L Front Premium Posi Ceramic Brake & Wheel Bearing Kit
2002-2005GMC Envoy XL GMC Envoy XL Front Premium Posi Ceramic Brake & Wheel Bearing Kit
2004-2005GMC Envoy XUV GMC Envoy XUV Front Premium Posi Ceramic Brake & Wheel Bearing Kit
2003-2006Isuzu Ascender Isuzu Ascender V8 5.3L Front Premium Posi Ceramic Brake & Wheel Bearing Kit
2005Saab 9-7X Saab 9-7X V8 5.3L Front Premium Posi Ceramic Brake & Wheel Bearing Kit
Part #: 1ABMS00016


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:45 min)