This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT Brake Pad Set
  • Replaces dealer part numbers: 18024383, 18025186, 18026185, 18026186, 18044437
  • Includes Shims

Brake Rotor Specifications:

  • Come as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 12062056, 19152703
  • Fits 5 Stud Wheels
  • Vented
  • 10.94" Diameter

Wheel Bearing & Hub Assembly Specifications:

  • Come as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Flanges
  • Includes ABS Sensor and Plug Wire
  • Replaces dealer part number: 88957259
  • Fit 5 Lug Wheels
  • Studs already installed

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Step 1: Remove front wheel. (1:15)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your lug wrench to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your lug wrench.
    • Remove the wheel and set aside.
  2. step : Step 2: Remove the front brake calipers (1:40)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 12mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 15mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Step 3: Install new brake rotor and pads (5:00)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 55-60 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 20 ft lbs.
  4. step : Step 5: Put your front wheel back on (8:58)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 75-85 ft lbs.
    • Replace hubcap/center cap.
  5. step : Step 6: Test and set brake pads and rotors (9:30)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 12mm Socket
  • 15mm Socket

5.0 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
6
0
0
0
0
Great parts Great price
I am very happy with these parts. I watched the instruction video which was very helpful. My 2002 Grand Am rides like a dream
May 18, 2017
Purchased
1 year ago
Great buy!
This was a perfect purchase! The whole kit in one purchase for a great price. So easy to install, I did it myself with absolutely no trouble, in less than 2 hours. Thank!
August 13, 2017
Purchased
8 months ago
Complete wheel hub and brake assembly kit for Pontiac 2003 Grand Am
I am very satisfied with the fast delivery and the parts ordered were a direct fit for an economical price..
October 23, 2017
Purchased
6 months ago
saved me time and money. will order more parts shortly.
April 26, 2017
Purchased
1 year ago
Great parts!
This was a great purchase! I need front brakes and a driver's side wheel bearing, but this was a better deal than buying them all separately. Parts are great and my car drives better than ever! I'll definitely be ordering from 1A again!
March 28, 2018
Purchased
1 month ago
Everything is awesome great people to do business with
Customer service is awesome returning items because I orders the wrong stuff is awesome this company is top knock so glad I found 1aauto . My friends are even amazed buy this company and the quality of the parts .
December 22, 2017
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Chevy Classic Front Ceramic Brake & Wheel Bearing Kit
  • 1997-2003 Chevy Malibu Front Ceramic Brake & Wheel Bearing Kit
  • 1999-2004 Olds Alero Front Ceramic Brake & Wheel Bearing Kit
  • 1997 Olds Cutlass (excluding Supreme Models) Front Ceramic Brake & Wheel Bearing Kit
  • 1998-1999 Olds Cutlass Front Ceramic Brake & Wheel Bearing Kit
  • 1999-2005 Pontiac Grand Am Front Ceramic Brake & Wheel Bearing Kit
Part #: 1ABMS00006


How-to Video:

(10:16 min)