Brake Pad Specifications:

  • Fits Front Rotors
  • 4 Piece Brake Pad Set
  • Includes shims
  • Direct replacements
  • Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Direct replacements
  • Fits 5 Lug Wheels
  • 11.69" (297mm) Diameter Vented Rotors

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Triangular Flanges
  • Fit 5 Lug Wheels
  • Replaces dealer part numbers: 7467357, 7467587, 12413093, 12413094, 12413125, 12413126, 12413194, 88964168
  • Wheel studs already installed
  • Include ABS sensors with correct plugs
  • Fit models with ABS (Anti-Lock Brakes) only
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Front or Rear Location: Front
  • Brake Rotor Coating: Zinc Coated
  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 11.69" (297mm)
  • Front Brake Rotor Specifications: 5 Lug
  • Product Line: Performance
  • Kit Includes: (2) Front Hub Assemblies

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel and tire (1:30)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:00)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 15mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
  3. step : Remove brake disk (2:44)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (2:56)
    • Remove the 3 bolts securing the hub using your 13mm socket and 3/8 extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a rubber mallet to break it free, and work around the flange with the hammer to pull it off.
    • Leave the top 13mm loosely still in to prevent the hub from flying out if you hit it too hard.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (8:30)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Watch part 2 to install your new 1A Auto hub!

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2007 Buick Allure Front Brake & Wheel Bearing Kit for Models with ABS Brakes Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance
  • 2008 Buick Allure Front Brake & Wheel Bearing Kit V6 3.6L with ABS Brakes (excluding Super Models) Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance
  • 2008 Buick Allure Front Brake & Wheel Bearing Kit V6 3.8L with ABS Brakes (excluding Super Models) Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance
  • 2005-2007 Buick LaCrosse Front Brake & Wheel Bearing Kit for Models with ABS Brakes Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance
  • 2008 Buick LaCrosse Front Brake & Wheel Bearing Kit V6 3.6L with ABS Brakes (excluding Super Models) Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance
  • 2008 Buick LaCrosse Front Brake & Wheel Bearing Kit V6 3.8L with ABS Brakes (excluding Super Models) Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance
  • 2005 Chevy Uplander Front Brake & Wheel Bearing Kit Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance
  • 2005-2008 Pontiac Grand Prix Front Brake & Wheel Bearing Kit V6 3.8L with ABS Brakes (excluding GXP Models) Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance
  • 2005 Pontiac Montana SV6 Front Brake & Wheel Bearing Kit Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance
  • 2005 Saturn Relay Front Brake & Wheel Bearing Kit Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance
Part #: 1ABMS00060

How-to Video:

(09:37 min)