This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • Fits FRONT Rotors
  • 4 Piece Brake Pad Set
  • No core charge
  • Includes shims
  • Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 1F1Z-1125-AA, 2F1Z-1125-AA, 4F1Z-1125-AA, F3LY-1125-A, F5OY-1125-A, F7LZ-1125-AA, F80Z-1125-AA, F8LZ-1125-AA, F8OZ-1125-AA, 1F1Z1125AA, 2F1Z1125AA, 4F1Z1125AA, F3LY1125A, F5OY1125A, F7LZ1125AA, F80Z1125AA, F8LZ1125AA, F8OZ1125AA
  • Fits 5 Lug Wheel
  • 11.57" (294mm) Diameter

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 3F13-2C300-BA, 3F1Z-1104-BA, F50Y-1104-A, F8RZ-1104-AA, XFI2-2C300-BB, XFIZ-1104AE-B, XFIZ-1104-BA, 3F132C300BA, 3F1Z1104BA, F50Y1104A, F8RZ1104AA, XFI22C300BB, XFIZ1104AEB, XFIZ1104BA
  • Fit 5 Lug Wheels
  • Wheel studs already installed

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove Wheel (1:09)
    • Remove hub nut
    • Remove lug nuts and remove wheel with an 18mm socket.
  2. step : Remove tie rod (1:50)
    • Remove cotter pin.
    • Use your 18 mm socket to remove the nut at the bottom of the tie rod.
    • Use your tie rod puller to pull the tie rod up.
    • Use your two adjustable wrenches to remove the tie rod.
  3. step : Remove the axle. (2:42)
    • Disconnect the brake line bracket and ABS sensor
    • Remove the upper stabilizer bolt with an 18mm wrench and a 10 mm wrench to secure it.
    • Remove the lower stabilizer bolt using your 18 mm wrench to secure it and a 21 mm socket.
    • Use a hammer to drive the bolt all the way out.
    • Move the steering knuckle off the strut with a hammer.
    • Tap the axle with a hammer and use a pry bar to pry it out of the steering knuckle.
    • Pry the other end of the axle out.
  4. step : Remove Brake Caliper (6:00)
    • Use your 12mm and 15mm socket wrenches to remove the calipers and caliper brackets.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your socket to remove the brackets.
    • Use a wire tie to secure the caliper up out of the way.
  5. step : Remove the brake rotor (7:00)
    • Take care not to touch the rotor, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  6. step : Remove Hub (7:08)
    • On this vehicle, the hub is cast iron and the knuckle is aluminum, seizing is a potential issue.
    • Use an air hammer and protective eyewear to break the hub free if this happens.
    • Remove the hub with a hammer.
    • Clean up any corrosion with a wire brush.
  7. step : Install new hub (9:26)
    • Use some penetrating oil or anti-seize grease to prep the knuckle for the new hub.
    • Put the three 15 mm bolts in place and tighten the nuts to 70 ft lbs.
    • Check out our other videos to see how to finish putting everything back together.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands
  • Wire Brush
  • Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant
  • Wire Ties

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 11mm Socket
  • 18mm Socket
  • 14mm Socket
  • 21mm Socket
  • 10mm Socket
  • 12mm Socket
  • 17mm Socket
  • 20mm Socket
  • 19mm Socket
  • 13mm Socket
  • 16mm Socket

  • Specialty Tools

  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench
  • 10mm Wrench
  • 13mm Wrench
  • 17mm Wrench
  • 12mm Wrench
  • 15mm Wrench
  • 14mm Wrench
  • 11mm Wrench
  • 16mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-1999 Ford Taurus SHO Front Ceramic Brake & Wheel Bearing Kit
  • 2001-2007 Ford Taurus Front Ceramic Brake & Wheel Bearing Kit
  • 1995-2002 Lincoln Continental Front Ceramic Brake & Wheel Bearing Kit
  • 2001-2005 Mercury Sable Front Ceramic Brake & Wheel Bearing Kit
Part #: 1ABMS00012



How-to Video:

(09:55 min)