Replaces

BMW Radiator Fan Shroud - 1ARFS00009

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement radiator fan shroud is just what you need to get your vehicle in good looking form again!

Specifications:

  • Brand New Radiator Fan Shroud
  • Replaces dealer part number: 17 11 1 436 259, 17111436259
  • Direct replacement
  • Built to strict quality control standards

This replacement radiator fan shroud makes a great replacement and has good cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:24)
    • Loosen the 10mm nut on the negative terminal
    • Disconnect the negative terminal
  2. step : Removing the Air Intake Duct (0:52)
    • Pry up the clips from the air intake
    • Remove the air intake duct
  3. step : Removing the Radiator Fan and Fan Shroud (1:17)
    • Disconnect the electrical connectors
    • Remove the T25 bolt from the fan
    • Pry out the push clip from the fan shroud
    • With a 32mm fan clutch tool and pneumatic air hammer, loosen the fan clutch from the engine side
    • Once loose, spin the fan off without letting it fall
    • Remove the fan and fan shroud
  4. step : Installing the Radiator Fan and Fan Shroud (4:40)
    • Transfer the old fan sensor to the new fan shroud
    • Insert the fan and fan shroud simultaneously
    • Tighten the fan to the engine side with a 32mm fan clutch tool and pneumatic air hammer
    • Torque the fan nut to 22-29 foot-pounds
    • Press the push-pin to the fan shroud
    • Tighten the T25 Torx bolt to the fan
    • Connect the two electrical connectors
  5. step : Installing the Air Intake Duct (7:40)
    • Insert the air intake duct into place
    • Press in the clips to the air intake duct
  6. step : Connecting the Battery (8:02)
    • Connect the negative terminal
    • Tighten the 10mm bolt to the negative terminal

Tools needed for replacement:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • Hex Wrenches

  • 5mm Hex Wrench

  • Ratchets & Related

  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Fan Clutch Wrench

  • Star Drivers & Sockets

  • T25 Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000BMW 323Ci BMW 323Ci Radiator Fan Shroud for Models with 5 Speed Automatic Transmission
1999-2000BMW 323i BMW 323i Radiator Fan Shroud
2001-2006BMW 325Ci BMW 325Ci Radiator Fan Shroud
2001-2005BMW 325Xi BMW 325Xi Radiator Fan Shroud for Models with 5 Speed Automatic Transmission
2001-2005BMW 325i BMW 325i Radiator Fan Shroud for Models with 5 Speed Automatic Transmission
2000BMW 328Ci BMW 328Ci Radiator Fan Shroud for Models with 5 Speed Automatic Transmission
1999-2000BMW 328i BMW 328i Radiator Fan Shroud for Models with 5 Speed Automatic Transmission
2001-2006BMW 330Ci BMW 330Ci Radiator Fan Shroud
2001-2005BMW 330Xi BMW 330Xi Radiator Fan Shroud for Models with 5 Speed Automatic Transmission
2001-2005BMW 330i BMW 330i Radiator Fan Shroud for Models with 5 Speed Automatic Transmission
Part 1ARFS00009
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.