Replaces

BMW Radiator Cooling Fan Assembly - 1ARFA00283

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Puller Fan Assembly
    • Mounts behind the radiator
  • 100% Performance factory tested
  • Comes with proper plug(s) for trouble free installation
  • Built to strict quality control standards
  • Direct bolt on

 

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Disconnecting the Battery (0:24)
    • Loosen the 10mm nut on the negative terminal
    • Disconnect the negative terminal
  2. step : Removing the Air Intake Duct (0:52)
    • Pry up the clips from the air intake
    • Remove the air intake duct
  3. step : Removing the Radiator Fan and Fan Shroud (1:20)
    • Disconnect the electrical connectors
    • Remove the T25 bolt from the fan
    • Pry out the push clip from the fan shroud
    • With a 32mm fan clutch tool and pneumatic air hammer, loosen the fan clutch from the engine side
    • Once loose, spin the fan off without letting it fall
    • Remove the fan and fan shroud
  4. step : Removing the Radiator Fan (4:24)
    • Remove the bolts from the fan and the fan clutch with a 5mm hex socket
    • Remove the fan clutch
  5. step : Installing the Radiator Fan (5:25)
    • Connect the fan clutch to the fan
    • Tighten the three 5mm hex bolts to the fan
    • Torque the bolts to 89 inch-pounds
  6. step : Installing the Radiator Fan and Fan Shroud (6:00)
    • Insert the fan and fan shroud simultaneously
    • Tighten the fan to the engine side with a 32mm fan clutch tool and pneumatic air hammer
    • Torque the fan nut to 22-29 foot-pounds
    • Press the push-pin to the fan shroud
    • Tighten the T25 Torx bolt to the fan
    • Connect the two electrical connectors
  7. step : Installing the Air Intake Duct (7:55)
    • Insert the air intake duct into place
    • Press in the clips to the air intake duct
  8. step : Connecting the Battery (8:18)
    • Connect the negative terminal
    • Tighten the 10mm bolt to the negative terminal

Tools needed for replacement:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • Hex Wrenches

  • 5mm Hex Wrench

  • Ratchets & Related

  • Torque Wrench

  • Specialty Tools

  • Fan Clutch Wrench

  • Star Drivers & Sockets

  • T25 Driver

  • Wrenches - Metric

  • 10mm Wrench

4.33/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
2
0
0
0
Cooling fan arrived on time as promised, was a perfect fit and works great.
August 7, 2017
Great buy,
The item was exactly as advertised, Will recommend it to anyone who wants great service
October 22, 2017
BMW Radiator Cooling Fan Assembly
Id recommend this item to anyone. Fitted perfectly to my 2000 328CI.
July 10, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this fan cone with the relay box as well?
Jay D April 21, 2019
No just the fan and fan shroud if you need a new relay you would have to purchase separate, I took out my manual fan and put this electric one in simple plug n play
Pamela K April 21, 2019
Year Make Model Description
2000BMW 323Ci BMW 323Ci Radiator Cooling Fan Assembly
1999-2000BMW 323i BMW 323i Radiator Cooling Fan Assembly
2001-2005BMW 325Xi BMW 325Xi Radiator Cooling Fan Assembly
2001-2005BMW 325i BMW 325i Radiator Cooling Fan Assembly
2000BMW 328Ci BMW 328Ci Radiator Cooling Fan Assembly
1999-2000BMW 328i BMW 328i Radiator Cooling Fan Assembly
2001-2005BMW 330Xi BMW 330Xi Radiator Cooling Fan Assembly
2001-2005BMW 330i BMW 330i Radiator Cooling Fan Assembly
Only 2 left in stock
Part 1ARFA00283
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.