Replaces

BMW O2 Oxygen Sensor Pair Walker Products 250-24810 - WKEEK00002

Walker Products Oxygen Sensor Pair: 250-24810

Walker Products, an ISO 9001-2008 / TS16949 certified company, specializes in the manufacturing and distribution of Fuel System Components and Automotive Engine Management products. Walker is committed to meeting or exceeding OEM or equivalent standards and specifications. This effort is backed by Walker's own manufacturing, product management and engineering expertise.

Specifications:

  • Comes as a PAIR
    • Includes both Upstream & Downstream sensors
  • Brand New Walker Oxygen Sensors
  • Direct Fit
    • Correct Connector No cutting or splicing
    • Correct wire length (39.0 Inches)
  • 4 wire configuration
  • Replaces dealer part numbers: 11781427884, 11 78 1 427 884, 11781437943, 11 78 1 437 943
  • Built and tested to strict quality control standards

Note: For clarification purposes:

  • Upstream location is between the catalytic converter and the engine
  • Downstream location is between the catalytic converter and the tailpipe

If you have bad O2 sensors causing your vehicle to run poorly or fail an emission test then these are the parts for you.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Identifying your Oxygen Sensors (0:57)
    • Upstream oxygen sensors are located in between the engine and the catalytic converter
    • Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
    • Locate your vehicle's firing order diagram
    • The bank that contains cylinder one is bank one
    • The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-1998 BMW 328i L6 2.8L Upstream & Downstream O2 Oxygen Sensor Pair Walker Products 250-24810
  • 1996-1998 BMW 328iC L6 2.8L Upstream & Downstream O2 Oxygen Sensor Pair Walker Products 250-24810
  • 1996-1999 BMW 328iS L6 2.8L Upstream & Downstream O2 Oxygen Sensor Pair Walker Products 250-24810
  • 1997-1998 BMW 528i L6 2.8L Upstream & Downstream O2 Oxygen Sensor Pair Walker Products 250-24810
  • 1996-1999 BMW M3 L6 3.2L Upstream & Downstream O2 Oxygen Sensor Pair Walker Products 250-24810

This part replaces:

  • Walker Products 250-24810
Only 3 left in stock
Part #: WKEEK00002

Walker Products
Brand #: 250-24810

How-to Video:

(03:08 min)