This new mass air flow sensor is just what you need to get your vehicle in good running order again!

Specifications:

  • Brand New Sensor
  • 3 pin connector
  • Direct replacement
  • Built to strict quality control standards

Installation Notes:

1. Make sure the air filter is in good condition and replace if necessary.
2. Clean out and inspect the intake hose when replacing this part. Moving the intake hose during replacement can loosen dirt which can then damage the new sensor.

This item is an electrical part. These units are tested prior to shipment.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Move the air intake tube out of the way. (1:00)
    • Loosen the clamps and disconnect the tube with your screwdriver.
    • Unclip the radiator hose.
  2. step : Remove the air flow sensor (1:35)
    • Disconnect the wiring harness.
    • Remove the hose clamp and use a screwdriver to break the seal to pull off the air flow sensor.
  3. step : Install the new airflow sensor (2:40)
    • Transfer the seal ring to the new sensor.
    • Mount the airflow sensor and tighten the clamp.
    • Reconnect the wiring harness.
    • Reconnect the intake tube and clip the radiator hose on.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
It Works For Me
I wasn't sure if the OEM MAF sensor on my 2002 BMW 330Ci was really the problem and didn't want to spend over $200 for the Siemens VDO brand. I had a rough idle on start up and poor gas mileage. Of course the Service Engine Soon light was lit. I installed the new sensor in about 5 minutes and cleared the code with my iPhone Ap and WiFi adapter. The immediately ran better. I am very pleased with the results and saved $140 !!!
November 30, 2015
Recently bought this item
The process was easy, the price was great and arrived in perfect time. Highly recommend using this company.
February 21, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(04:58 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver



This part replaces:

  • Hollander 336-60585
  • OE # 13621438871
  • OE # 8ET009142341
  • OE # 5WK96132

Vehicle Fit

  • 2001-2002 BMW 330Ci Mass Air Flow Sensor at Throttle Housing
  • 2003 BMW 330Ci Mass Air Flow Sensor (Built Before 2/03 Production Date) at Throttle Housing
  • 2001-2005 BMW 330Xi Mass Air Flow Sensor at Throttle Housing
  • 2001-2002 BMW 330i Mass Air Flow Sensor at Throttle Housing
  • 2003 BMW 330i Mass Air Flow Sensor (Built Before 9/02 Production Date) at Throttle Housing
  • 2001-2003 BMW 530i Mass Air Flow Sensor at Throttle Housing
  • 2004 BMW 530i E39 Mass Air Flow Sensor at Throttle Housing
  • 2001-2006 BMW X5 Mass Air Flow Sensor L6 3.0L at Throttle Housing
  • 2001-2002 BMW Z3 Mass Air Flow Sensor L6 3.0L at Throttle Housing
Part #: 1AEAF00061

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More