BMW Door Lock Actuator - 1ADLA00045

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Operation:   Power

This is a power door lock actuator that mounts inside the door. It is designed to replace a broken or missing unit.


  • Fits LH (Driver Side) or RH (Passenger Side) Front Door
    • as listed per application
  • Replaces dealer part numbers: 67118353012, 67 11 8 353 012
  • Correct electrical connection
  • Built to strict quality control standards

This power door lock actuator is a great replacement and has substantial cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (1:12)
    • Remove the two Phillips screws from the door pull
    • Use a flat blade screwdriver to pry out the door handle bezel.
    • Use a putty knife to carefully pry off the door panel and unclip the clips securing it.
    • Pull off the panel and unplug all the wiring
  2. step : Remove the door lock actuator (3:45)
    • Carefully pull aside the plastic water shield
    • Drill out the rivets securing the door lock actuator.
    • Unclip the lock rods and unplug the wiring harness
    • Transfer the mounting bracket and dust cover to the new lock actuator
  3. step : Install the new door lock actuator (5:40)
    • Use a couple coarse threaded bolts rather than rivets to re-install the door lock actuator
    • Plug in the wiring harness and lock rods.
    • Test your connections to make sure the doors lock and unlock properly.
  4. step : Re-install the door panel (7:00)
    • Put the water shield back into place.
    • Reconnect the speaker and light.
    • Thread the wiring harness back into place.
    • Clip the door panel back on.
    • Re-install the door handle bezel.
    • Plug in the control panel.
    • Bolt back in the door handle pull using your Phillips screwdriver.

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 5/16 Inch Drill Bit

  • General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 4mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

4.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
BMW Actuator
Works well, just a little slower operation that the other doors, but overall fine. Excellent price!
December 11, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-1998BMW 318i BMW 318i Front Power Door Lock Actuator
1992-1997BMW 318iS BMW 318iS Front Power Door Lock Actuator
1995-1999BMW 318ti BMW 318ti Front Power Door Lock Actuator
1998BMW 323i BMW 323i Front Power Door Lock Actuator
1999BMW 323i BMW 323i Front Power Door Lock Actuator
1998-1999BMW 323iS BMW 323iS Front Power Door Lock Actuator
1992-1995BMW 325i BMW 325i Front Power Door Lock Actuator
1992-1995BMW 325is BMW 325is Front Power Door Lock Actuator
1996-1999BMW 328i BMW 328i Front Power Door Lock Actuator
1996-1999BMW 328iS BMW 328iS Front Power Door Lock Actuator
1993-1995BMW 525iT BMW 525iT Front Power Door Lock Actuator
1994-1995BMW 530i BMW 530i Front Power Door Lock Actuator
Part #: 1ADLA00045

Out of Stock

How-to Video:

(10:01 min)