Replaces

BMW 325Xi 330Xi Front Driver Side Ball Joint - 1ASBJ00111

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement ball joint is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits the LH (Driver Side) FRONT LOWER INNER
  • Replaces dealer part number: 31 12 6 756 695, 31126756695
  • 49mm Diameter
  • Direct replacement
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacement.

One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greasable versions.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:24)
    • Loosen the 17 mm lug bolts
    • Raise and support the vehicle
    • Remove the lug bolts
    • Remove the wheel
  2. step : Removing the Front Inner Lower Ball Joint (1:03)
    • Loosen the 18 mm lower outer ball joint nut
    • Loosen the lower outer ball joint
    • Remove the 18 mm nut and remove the lower outer ball joint from the knuckle
    • Loosen the 22 mm inner ball joint nut
    • Remove the two 18 mm inner ball joint mounting bolts
    • Remove the inner ball joint from the frame
    • Remove the 22 mm inner ball joint nut
    • Separate the inner ball joint from the control arm
  3. step : Installing the Front Inner Lower Ball Joint (5:34)
    • Insert the inner ball joint into the control arm
    • Insert the 18 mm inner ball joint mounting bolts through the ball joint into the frame
    • Torque the inner ball joint 18 mm mounting bolts to 57 ft-lb
    • Install the 22 mm inner ball joint nut and torque it to 57 ft-lb
    • Insert the outer ball joint into the wheel knuckle
    • Install the outer ball joint 19 mm nut and torque it to 48 ft-lb
  4. step : Installing the Wheel (7:44)
    • Set the wheel on the hub rim
    • Install the 17 mm lug bolts by hand
    • Lower the vehicle with minimal weight on the wheel
    • Torque the 17 mm lug bolts to 95 ft-lb in a star pattern
    • Lower the vehicle completely

Tools needed for replacement:

    Air Powered Tools

  • 1/2 Inch Air Impact Gun

  • General Tools

  • Hammer

  • Hex Wrenches

  • 6mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 17mm Socket
  • 18mm Socket
  • 19mm Socket
  • 22mm Socket

  • Specialty Tools

  • Pickle Fork

  • Wrenches - Metric

  • 18mm Wrench
  • 19mm Wrench
  • 22mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001BMW 325Xi BMW 325Xi (Built After 1/01 Production Date) Front Driver Side Inner Lower Ball Joint
2002-2005BMW 325Xi BMW 325Xi Front Driver Side Inner Lower Ball Joint
2001BMW 330Xi BMW 330Xi (Built After 1/01 Production Date) Front Driver Side Inner Lower Ball Joint
2002-2005BMW 330Xi BMW 330Xi Front Driver Side Inner Lower Ball Joint
Part 1ASBJ00111
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.