This blower motor resistor is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! On most vehicles it is mounted to the HVAC unit inside the passenger compartment. It can be accessed from the passenger foot well area.

Specifications:

  • Fits the FRONT BLOWER MOTOR
  • New, not remanufactured or rebuilt
  • Direct replacement
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • 8 Terminal connection
  • Correct for Models with Manual Temperature Controls
    • Does NOT fit models with ATC (Automatic Temperature Control)

If you are experiencing intermittent stopping during use or the fan only works in one position this may be your solution!

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Blower Motor Resistor (0:42)
    • Lower the glove box
    • Pull the sides in on the glove box to pull it down
    • Disconnect the two harnesses in the blower motor resistor
    • Loosen the two 8mm bolts
    • Remove the resistor
  2. step : Installing the Blower Motor Resistor (2:15)
    • Insert the new resistor into place
    • Tighten the two 8mm bolts
    • Connect the two harnesses to the blower motor resistor
    • Push the glove box into place

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

  • Wrenches - Metric

  • 8mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
As I expected
I have been ordering parts from 1a for a while and once again they came through. Part was right, reasonable cost and fast delivery. Thank you!!
July 8, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2008 Chrysler Pacifica Blower Motor Resistor with Manual Temperature Control
  • 2001-2007 Chrysler Town & Country Front Heater Blower Motor Resistor with Manual Temperature Control
  • 2001-2003 Chrysler Voyager Front Heater Blower Motor Resistor with Manual Temperature Control
  • 2001-2007 Dodge Caravan Front Heater Blower Motor Resistor with Manual Temperature Control
  • 2001-2007 Dodge Grand Caravan Front Heater Blower Motor Resistor with Manual Temperature Control

This part replaces:

  • OE # 4885583AA, 4885583AB, 4885583AC, 68029175AA
  • Dorman 973-022
  • Standard Motor Products RU-362
Part #: 1AHBR00015

How-to Video:

(03:54 min)