Replaces

Blower Motor Resistor with Plug & Pigtail Front Dorman 973-426 - DMERK00003

Dorman Blower Motor Resistor Kit: 973-426

This Blower Motor Resistor & Repair Harness is just what you need to bring you Heating & A/C system back to life! If your original harness is melted, this connector is your solution.

Specifications:

  • Brand New Dorman Blower Motor Resistor Kit
    • Includes Blower Motor Resistor and Plug with Pigtail
  • Direct fit replacements
  • 5 pin connection
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

This resistor & repair harness makes great replacements and is a good value compared to the dealer parts!

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Part Details

  • Front or Rear Location: Front

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Access the resistor (1:00)
    • Remove the three screws under the glove compartment.
    • Use your 7mm socket and driver
  2. step : Remove the resistor (1:45)
    • Remove the 6mm bolts and remove the resistor.
    • Use a swivel socket to access the bolts.
    • Unplug the resistor from the harness.
  3. step : Install new resistor (3:35)
    • Use your swivel socket to bolt it back in.
    • Replace the panel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Swivel

  • Sockets - Metric

  • 6mm Socket
  • 7mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Big savings!
The fan in my 03 Dakota completely stopped working. The resistor had melted to the harness and I had to replace everything. The local dealership wanted close to $200 for the parts, thanks to 1aauto I was able to get the same parts at a SMALL fraction of the price. Installation was simple and now the fan blows as it should. Just in time for subzero Colorado temperatures!!!
December 24, 2016
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2009 Chrysler Aspen Front Blower Motor Resistor with Plug & Pigtail with Manual Temperature Control Dorman 973-426
  • 2001-2004 Dodge Dakota Front Blower Motor Resistor with Plug & Pigtail Dorman 973-426
  • 2001-2009 Dodge Durango Front Blower Motor Resistor with Plug & Pigtail with Manual Temperature Control Dorman 973-426

This part replaces:

  • Dorman 973-426
  • OE # 4885635AA
  • OE # 4885635AC
  • OE # 5061575AA
Only 4 left in stock
Part #: DMERK00003

Dorman
Brand #: 973-426

How-to Video:

(06:12 min)