This Harness for the Blower Motor Resistor is just what you need to bring you Heating & A/C system back to life! If your original harness is melted, this connector is your solution.

Specifications:

  • Direct fit replacement
  • Replaces dealer part number: 5017124AB
  • 5 pin connection
  • Correct for models without Automatic Temperature Control
  • Built to strict quality control standards

This repair harness makes a great replacement and is a good value compared to the dealer part!

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Step 1: access the resistor (1:00)
    • Remove the three screws under the glove compartment.
    • Use your 7mm socket and driver
  2. step : Step 2: remove the resistor (1:45)
    • Remove the 6mm bolts and remove the resistor.
    • Use a swivel socket to access the bolts.
    • Unplug the resistor from the harness.
  3. step : Step 3 Install new resistor (3:35)
    • Use your swivel socket to bolt it back in.
    • Replace the panel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Swivel

  • Sockets - Metric

  • 6mm Socket
  • 7mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2008 Chrysler 300 Blower Motor Resistor Plug with Pigtail with Manual Temperature Control
  • 2007-2009 Chrysler Aspen Blower Motor Resistor Plug with Pigtail with Manual Temperature Control
  • 2008-2010 Dodge Challenger Blower Motor Resistor Plug with Pigtail with Manual Temperature Control
  • 2006-2008 Dodge Charger Blower Motor Resistor Plug with Pigtail with Manual Temperature Control
  • 2001-2004 Dodge Dakota Blower Motor Resistor Plug with Pigtail
  • 2001-2008 Dodge Durango Blower Motor Resistor Plug with Pigtail with Manual Temperature Control
  • 2005-2008 Dodge Magnum Blower Motor Resistor Plug with Pigtail with Manual Temperature Control
  • 2006-2008 Jeep Commander (XK) Blower Motor Resistor Plug with Pigtail with Manual Temperature Control

This part replaces:

  • OE # 5017124AB
  • Standard Motor Products S-1768
Part #: 1AZMX00143

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(06:12 min)