Replaces

Blower Motor Resistor Connector Plug Mopar 5017124AB - MPZMX00005

MOPAR BLOWER MOTOR RESISTOR CONNECTOR: 5017124AB

This Harness for the Blower Motor Resistor is a genuine Mopar replacement part! It is the very same piece you would receive if purchased from your local dealer!

Specifications:

  • Brand New Mopar Blower Motor Resister Harness
  • Original equipment replacement
  • Replaces dealer part number: 5017124AB
  • Built to strict quality control standards

Now you can have a genuine Mopar blower motor resistor harness with pigtail shipped right to your door!

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Step 1: access the resistor (1:00)
    • Remove the three screws under the glove compartment.
    • Use your 7mm socket and driver
  2. step : Step 2: remove the resistor (1:45)
    • Remove the 6mm bolts and remove the resistor.
    • Use a swivel socket to access the bolts.
    • Unplug the resistor from the harness.
  3. step : Step 3 Install new resistor (3:35)
    • Use your swivel socket to bolt it back in.
    • Replace the panel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Swivel

  • Sockets - Metric

  • 6mm Socket
  • 7mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2008 Chrysler 300 Blower Motor Resistor Connector Plug with Manual Temperature Control Mopar 5017124AB
  • 2007-2009 Chrysler Aspen Blower Motor Resistor Connector Plug with Manual Temperature Control Mopar 5017124AB
  • 2008-2010 Dodge Challenger Blower Motor Resistor Connector Plug with Manual Temperature Control Mopar 5017124AB
  • 2006-2008 Dodge Charger Blower Motor Resistor Connector Plug with Manual Temperature Control Mopar 5017124AB
  • 2001-2004 Dodge Dakota Blower Motor Resistor Connector Plug Mopar 5017124AB
  • 2001-2008 Dodge Durango Blower Motor Resistor Connector Plug with Manual Temperature Control Mopar 5017124AB
  • 2005-2008 Dodge Magnum Blower Motor Resistor Connector Plug with Manual Temperature Control Mopar 5017124AB
  • 2006-2008 Jeep Commander (XK) Blower Motor Resistor Connector Plug with Manual Temperature Control Mopar 5017124AB

This part replaces:

  • Mopar 5017124AB
  • OE # 5017124AB
Only 2 left in stock
Part #: MPZMX00005

Brand #: 5017124AB

How-to Video:

(06:12 min)