Specifications:

  • Comes as a Set of 4
    • Fits the LH (Driver Side) & RH (Passenger Side) Upper & Lower
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greasable versions.

Part Details

  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:42)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:04)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:24)
    • Remove 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad brackets
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (2:07)
    • Remove the 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (2:30)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on
    • Remove the brake pad slides
    • Put the bracket back into place
    • Start the 15mm bolts by hand
    • Tighten the bolts to 65 foot-pounds of torque
  6. step : Installing the New Brake Pads (3:54)
    • Clean the brake pad brackets with a wire brush
    • Push the brackets onto the caliper bracket
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts the 14mm by hand
    • Tighten bolts to 35 foot-pounds
  7. step : Reattaching the Wheel (5:22)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  8. step : Testing the Brakes (5:58)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • White Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
2
0
0
0
Fits good
Cheap price, fast shipping overall definitely will shop with them again.
May 22, 2018
Purchased
3 months ago
The ball joints I ordered didn't fit my truck but the customer service was great I had no problem getting my refund back I emailed customer service and had my refund back on my card in five days I was very satisfied with customer service I will use 1a auto again
March 10, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-2002Ford Expedition Ford Expedition Front Upper & Lower Ball Joint 4 Piece Set
2004Ford F150 Heritage Truck Ford F150 Heritage Truck Front Upper & Lower Ball Joint 4 Piece Set
1997-2003Ford F150 Truck Ford F150 Truck Front Upper & Lower Ball Joint 4 Piece Set
1997-1999Ford F250 Light Duty Truck Ford F250 Light Duty Truck Front Upper & Lower Ball Joint 4 Piece Set
1998-2002Lincoln Navigator Lincoln Navigator Front Upper & Lower Ball Joint 4 Piece Set

This part replaces:

  • Moog K8694T
  • Moog K80014
  • Moog K80771
Part #: 1ASBS00079


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:18 min)