Specifications:

  • Brand New Ball Joints
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greasable versions.

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:23)
    • Loosen the lug nut covers with the supplied lug nut tool
    • Loosen the 17mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Ball Joint (2:34)
    • Remove the three 16mm bolts from the ball joint
    • Loosen the upper nut with an 18mm box wrench
    • If the stud keeps spinning, hold the base with locking pliers
    • Remove the nut
    • Lower the control arm and remove the ball joint
  3. step : Installing the Ball Joint (5:35)
    • Insert the ball joint into place
    • Tighten the 18mm nut by hand
    • Tighten the 18mm nut with a box wrench
    • Tighten the three 16mm bolts
    • Torque the 16mm nuts to 16 newton meters
  4. step : Reattaching the Wheel (6:58)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 Newton meters in a crossing or star pattern
    • Tighten the lug nut covers

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket
  • 18mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Control arms
Car is running great these new control arms tightened up the front end of my vw jetta
August 8, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2013 Audi A3 Front Lower Ball Joint Pair
  • 2006-2013 Audi A3 Quattro Front Lower Ball Joint Pair
  • 2012-2017 VW Beetle Front Lower Ball Joint Pair
  • 2007-2016 VW Eos Front Lower Ball Joint Pair
  • 2006-2014 VW GTI Front Lower Ball Joint Pair
  • 2010-2014 VW Golf Front Lower Ball Joint Pair
  • 2005 VW Jetta (8th Vin Digit K) Front Lower Ball Joint Pair
  • 2006-2017 VW Jetta Front Lower Ball Joint Pair
  • 2012-2017 VW Passat Front Lower Ball Joint Pair
  • 2008 VW R32 Front Lower Ball Joint Pair
  • 2006-2009 VW Rabbit Front Lower Ball Joint Pair
  • 2009-2017 VW Tiguan Front Lower Ball Joint Pair

This part replaces:

  • Moog K80662
  • Moog K80663
  • Beck Arnley 101-5971
  • Beck Arnley 101-5972
  • OE # 1K0407365C
  • OE # 1K0407366C
Part #: 1ASFK03326


Order must be placed by 4pm ET

How-to Video:

(08:44 min)