BECK / ARNLEY BALL JOINTS: 101-4113

Beck/Arnley® is a leading specialty supplier of premium, quality import parts for cars, light trucks and SUVs. Unlike others, Beck/Arnley is committed to meeting their promise to provide the import parts by model and year to equal OE form, fit, and performance. All Beck/Arnley products meet or exceed OE specifications.

Specifications:

  • Brand New Beck / Arnley Ball Joints
  • Comes as a PAIR
    • Fits both LH (Driver Side) RH (Passenger Side) FRONT LOWER
  • Press into control arms or steering knuckles depending on application
  • Exact replacements for originals
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacement. One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Beck/Arnley thinks of the needs of the service technician first. They evaluate OE parts for each vehicle model and year, and determine the quality standards needed for maintenance and repair work. As automotive vehicle professionals, the Beck/Arnley Product Managers seek out finished goods or assembled kits to cover the basics of the installation and make improvements when possible.

In other words, Beck/Arnley parts look, fit, and install just like the originals. They are the right replacement parts for you vehicle!

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:14)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:34)
    • Turn the wheel by hand
    • Hold the upper stabilizer link stud with a 14mm or 9/16 inch wrench
    • Remove the upper nut from the stabilizer link with a 14mm wrench
    • Hold the lower stabilizer link stud with a 14mm or 9/16 inch wrench
    • Remove the lower nut from the stabilizer link with a 14mm wrench
    • Pull off the stabilizer link
  3. step : Removing the Control Arm (3:02)
    • Loosen the lower ball joint nut with a 19mm wrench
    • Strike the wheel spindle with a hammer to loosen the ball joint
    • Remove the two 19mm bolts from the control arm
    • Loosen the 19mm bolts from the control arm bracket
    • Remove the 22mm bolt from the control arm
    • Remove the 19mm nut from the ball joint
    • Pry the control arm off with a pry bar
  4. step : Removing the Ball Joint from the Control Arm (7:08)
    • Tear the boot off the ball joint
    • Break off the metal ring at the base of the ball joint
    • Knock out the ball joint c-clip with a flat blade screwdriver and a hammer
    • Put a 30mm socket over the ball joint
    • Hammer the ball joint out of the control arm using the socket
  5. step : Installing the New Ball Joint into the Control Arm (8:52)
    • Put the new ball joint into the control arm
    • Put a 30mm socket on the back of the ball joint
    • Hammer the ball joint into the control arm with a socket
    • Apply grease to the ball joint
    • Put the c-clip onto the ball joint
    • Put a 36mm socket on the ball joint
    • Hammer in the c-clip with the socket
    • Push the clip in with a flat blade screwdriver and a hammer
    • Apply more grease to the ball joint
    • Put the boot into place
    • Put a 36mm socket on the boot
    • Hammer in the boot with the socket
    • Push the boot in with a flat blade screwdriver and a hammer
  6. step : Reinstalling the Control Arm (12:04)
    • Put the control arm into place, starting at the rear
    • Feed the 22mm bolt into the control arm
    • Push the ball joint into place
    • Thread the 19mm nut onto the ball joint by hand
    • Insert the two 19mm bolts into the control arm
    • Insert the 22mm bolt
    • Tighten the 19mm bolts to 100 - 110 foot-pounds of torque
    • Tighten the 22mm bolt to 130 foot-pounds
    • Tighten the 19mm nut on to the ball joint
  7. step : Reinstalling the Stabilizer Link (14:39)
    • Push the stabilizer link into place
    • Start the 14mm nuts by hand
    • Hold the upper stabilizer link stud with a 14mm or 9/16 inch wrench
    • Fasten the upper nut onto the stabilizer link with a 14mm wrench
    • Hold the lower stabilizer link stud with a 14mm or 9/16 inch wrench
    • Fasten the lower nut onto the stabilizer link with a 14mm wrench
  8. step : Reattaching the Wheel (15:34)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket
  • 30mm Socket
  • 19mm Socket
  • 36mm Socket
  • 14mm Socket

  • Specialty Tools

  • Vise-Grips

  • Wrenches - Metric

  • 19mm Wrench
  • 14mm Wrench

  • Wrenches - SAE

  • 9/16 Inch Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1995-1999 Hyundai Accent Front Lower Ball Joint Pair Beck / Arnley 101-4113
  • 1996-2006 Hyundai Elantra Front Lower Ball Joint Pair Beck / Arnley 101-4113
  • 1989-2005 Hyundai Sonata Front Lower Ball Joint Pair Beck / Arnley 101-4113
  • 1997-2001 Hyundai Tiburon Lower Ball Joint Pair Front Beck / Arnley 101-4113
  • 2003-2008 Hyundai Tiburon Front Lower Ball Joint Pair Beck / Arnley 101-4113
  • 2001 Hyundai XG300 Front Lower Ball Joint Pair Beck / Arnley 101-4113
  • 2002-2005 Hyundai XG350 Front Lower Ball Joint Pair Beck / Arnley 101-4113
  • 2004-2009 Kia Spectra Front Lower Ball Joint Pair Beck / Arnley 101-4113
  • 2005-2009 Kia Spectra 5 Front Lower Ball Joint Pair Beck / Arnley 101-4113

This part replaces:

  • Beck / Arnley 101-4113
Only 1 left in stock
Part #: BASFK00044

Beck / Arnley
Brand #: 101-4113

How-to Video:

(16:33 min)