Replaces

Ball Joint Front Driver or Passenger Side MOOG K8695T - MGSBJ00022

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Side Location:   Driver or Passenger Side
  • Front or Rear Location:   Front
  • Location:   Lower

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) Front Lower
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the Wheel (1:59)
    • Pull off the center cap
    • Loosen the lug nuts
    • Remove the cotter pin and loosen the 35mm hub nut
    • Loosen the seven 13mm 12-point bolts that hold the axle to the front drive
    • Raise and secure the car
    • Remove the wheel
  2. step : Loosen the Torsion Bar (2:54)
    • Spray the torsion bar with spray paint and loosen the torsion bar tension bolt with an 18mm bolt
  3. step : Remove the Tie Rod (3:45)
    • Use a pair of pliers to remove the cotter pin
    • Remove the nut at the end of the tie rod
    • Use a tie rod puller to separate the tie rod
  4. step : Remove the stabilizer links (5:25)
    • Use a 9/16 wrench to secure the bottom and a 14 mm socket to unbolt the stabilizer link
    • Use a hammer and punch to remove the stabilizer link
  5. step : Pull the Axle from the CV Joint (6:52)
    • Unbolt the seven bolts, using a pry bar to keep the hub from rotating
    • Remove the hub nut using a 35 mm socket
    • Give the axle a tap with a hammer and pull the axle out
  6. step : Remove the Ball Joint (9:00)
    • Use a jack and wood plank or two to lift the control arm and relieve tension from the ball joint
    • Unbolt the the ball joint using a breaker bar and 27mm socket
    • Use a ball joint removal tool to pull the ball joint apart
    • With a ball joint press, remove the ball joint completely
    • See Part Two for reassembly

Tools needed for replacement:

    General Tools

  • Center Punch
  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Marker / Writing Utensil
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • Ball Joint Press
  • Tie Rod Puller

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2002Ford Expedition Ford Expedition Front Lower Ball Joint Driver or Passenger Side MOOG K8695T
1995-2005Ford Explorer Ford Explorer Front Lower Ball Joint Driver or Passenger Side MOOG K8695T
2001-2005Ford Explorer Sport Trac Ford Explorer Sport Trac Front Lower Ball Joint Driver or Passenger Side MOOG K8695T
2004Ford F150 Heritage Truck Ford F150 Heritage Truck Front Lower Ball Joint Driver or Passenger Side MOOG K8695T
1997-2003Ford F150 Truck Ford F150 Truck Front Lower Ball Joint Driver or Passenger Side MOOG K8695T
1997-1999Ford F250 Light Duty Truck Ford F250 Light Duty Truck Front Lower Ball Joint Driver or Passenger Side MOOG K8695T
1998-2001Ford Ranger Ford Ranger Front Lower Ball Joint Driver or Passenger Side for Models with Front Torsion Bar Suspension MOOG K8695T
2003-2005Lincoln Aviator Lincoln Aviator Front Lower Ball Joint Driver or Passenger Side MOOG K8695T
2002Lincoln Blackwood Lincoln Blackwood Front Lower Ball Joint Driver or Passenger Side MOOG K8695T
1998-2002Lincoln Navigator Lincoln Navigator Front Lower Ball Joint Driver or Passenger Side MOOG K8695T
2001-2009Mazda B2300 Truck Mazda B2300 Truck Front Lower Ball Joint Driver or Passenger Side for Models with Front Torsion Bar Suspension MOOG K8695T
1999-2001Mazda B2500 Truck Mazda B2500 Truck Front Lower Ball Joint Driver or Passenger Side for Models with Front Torsion Bar Suspension MOOG K8695T
1998-2001Mazda B3000 Truck Mazda B3000 Truck Front Lower Ball Joint Driver or Passenger Side for Models with Front Torsion Bar Suspension MOOG K8695T
1998-2001Mazda B4000 Truck Mazda B4000 Truck Front Lower Ball Joint Driver or Passenger Side for Models with Front Torsion Bar Suspension MOOG K8695T
1997-2010Mercury Mountaineer Mercury Mountaineer Front Lower Ball Joint Driver or Passenger Side MOOG K8695T
Only 3 left in stock
Part #: MGSBJ00022


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

MOOG
Brand #: K8695T

How-to Video:

(13:53 min)