Replaces

Auto-Locking Hub Actuator & Vacuum Solenoid Valve Kit Motorcraft & Ford CX-2117, 7L1Z-3C247-A - MCSHS00026

Specifications:

  • Brand NEW Motorcraft Front Auto Locking Hub Actuator & Solenoid Valve
  • Includes:
    • (2) Auto Locking Hub Actuators
    • (1) Vacuum Control Solenoid
  • Correct vacuum & electrical connections
  • Durable construction shift actuator
  • Direct replacement
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Raise and Secure the Vehicle (1:08)
    • Raise the vehicle with a jack
    • Secure the vehicle on jack stands
  2. step : Removing the CV Axle Shaft (1:08)
    • Pry off the wheel center cap with a flat blade screwdriver
    • Remove the cap over the hub nut
    • Remove the 13mm hub nut
    • While holding the tire in place, remove the six twelve-point 12mm bolts from the CV joint
    • Remove the 30mm bolt from the strut assembly using a breaker bar or ratchet and pipe
    • Tap the nut with a hammer to loosen it, if necessary
    • Pry the lower end of the strut assembly from the lower control arm with a pry bar
    • Pull out the CV shaft
  3. step : Removing the Four Wheel Drive Actuator (4:03)
    • Remove the three 8mm bolts from the four wheel drive actuator
    • Pry off the actuator with a flat blade screwdriver
    • Disconnect the vacuum hoses from the actuator
  4. step : Installing the New Actuator (5:00)
    • Connect the vacuum hoses to the new actuator
    • Put the actuator into place
    • Start the three 8mm bolts by hand
    • Tighten the three 8mm bolts
  5. step : Reattaching the CV Axle (6:02)
    • Slide the CV Axle back into place
    • Reconnect the strut at the lower control arm
    • Push the bolt through where the strut connects to the lower control arm
    • Attach the nut
    • Tighten the bolt to between 95-100 foot-pounds of torque
    • Start the 12-point 12mm bolts into the CV axle by hand
    • Tighten the bolts preliminarily
    • Tighten the bolts to 25 foot-pounds in a crossing or star pattern
    • Reinstall the 13mm nut on the end of the axle
    • Reinstall the cap over the nut
    • Reinstall the center cap
    • Lower the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 24mm Socket
  • 30mm Socket
  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:51 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 24mm Socket
  • 30mm Socket
  • 8mm Socket



This part replaces:

  • Motorcraft & Ford CX-2117, 7L1Z-3C247-A
  • OE # 6L3Z9E441A
  • OE # 7L1Z-3C247-A

Vehicle Fit

  • 1997-2006 Ford Expedition Auto-Locking Hub Actuator & Vacuum Solenoid Valve Kit Motorcraft & Ford CX-2117, 7L1Z-3C247-A
  • 2004 Ford F150 Heritage Truck Auto-Locking Hub Actuator & Vacuum Solenoid Valve Kit Motorcraft & Ford CX-2117, 7L1Z-3C247-A
  • 1997-2003 Ford F150 Truck Auto-Locking Hub Actuator & Vacuum Solenoid Valve Kit Motorcraft & Ford CX-2117, 7L1Z-3C247-A
  • 2004-2008 Ford F150 Truck Auto-Locking Hub Actuator & Vacuum Solenoid Valve Kit Motorcraft & Ford CX-2117, 7L1Z-3C247-A
  • 2006-2008 Lincoln Mark LT Auto-Locking Hub Actuator & Vacuum Solenoid Valve Kit Motorcraft & Ford CX-2117, 7L1Z-3C247-A
  • 1998-2006 Lincoln Navigator Auto-Locking Hub Actuator & Vacuum Solenoid Valve Kit Motorcraft & Ford CX-2117, 7L1Z-3C247-A
Only 2 left in stock
Part #: MCSHS00026

Ships Same Day for orders placed by 4 P.M. ET

Motorcraft & Ford
Brand #: CX-2117, 7L1Z-3C247-A

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More