This replacement power window regulator is just what you need to get your vehicle in good shape again!

Specifications:

  • Fits the RH (Passenger Side) FRONT DOOR
  • Replaces dealer part numbers: 8E0 837 462 C, 8E0837462C
  • Power operation
  • Direct replacement
  • Built to strict quality control standards
  • Correct for sedan & wagon models only
    • does not fit convertible models

This power window regulator makes a great replacement and has good cost savings over the dealer unit.

Installation:

  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

 

Please Note:  This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: without Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:33)
    • Lift the hood
    • Pull back the weatherstrip and disconnect the battery
    • Disconnect the negative battery terminal
    • Pop off the trim button below the door pull
    • Pry off the silver trim piece with a flat blade screwdriver
    • Remove the two screws on the bottom of the door panel
    • Remove the four screws from the top of the door panel
    • Pry out the door panel with a door panel removal tool
    • Pull the door panel up and off
    • Disconnect the door latch cable
    • Disconnect the speaker wiring harness
    • Pry the orange safety clip on the switch panel wiring harness
    • Remove the three T25 Torx screws from the window motor
    • Disconnect the three wiring harnesses from the window motor
    • Remove the T25 screws from the sensor
    • Carefully peel off the water shield
    • Remove the three T35 black screws from the speaker
    • Disconnect the other speaker wiring harness
    • Pull the speaker out, up, and off
    • Pry out the two trim panels at the corner of the door with a flat blade screwdriver
    • Pry off the weatherstrip with needle nose pliers
  2. step : Removing the Window Frame (5:21)
    • Remove the two T25 Torx screws from the bottom of the regulator
    • Disconnect the side view mirror wiring harness
    • Pull the side mirror wiring from its clips to release it from the door
    • Remove the four T45 bolts from the door frame
    • Remove the black phosphate coated T45 bolt from the door frame
    • Pull the weatherstrip off the side of the door frame
    • Pry out the rubber trim button on the side of the door
    • Remove the T45 Torx bolt below the rubber trim
    • Push the blue regulator motor caps through the door
    • Pull the window frame up and out
  3. step : Removing the Window Regulator (7:28)
    • Remove the two T25 bolts that hold the window to the regulator
    • Disconnect the orange clips from the window
    • Slide the window out by hand
    • Remove the two T25 bolts from the window track
    • Pull the window regulator out
  4. step : Installing the Window Regulator (8:23)
    • Make sure the regulator cables are aligned
    • Tighten the two T25 bolts that hold the window to the regulator
    • Cut the wire ties off the new regulator motor with pliers
    • Align the window with the window track
    • Slide the window up to secure it in place
    • Slide the regulator's rails into the brackets on the window
    • Tighten the bottom two T25 Torx bolts
    • Slide the window up
  5. step : Installing the Window Frame (10:45)
    • Remove the wire clips in the door frame
    • Insert the regulator assembly into place
    • Push the power mirror harness into the door
    • Insert the T45 Torx bolt to the side of the door
    • Insert the top T45 bolts to the door frame
    • Tighten the two T25 bolts that hold the window to the regulator
    • Insert the speaker into place
    • Tighten the three T35 black screws to the speaker
    • Insert the weatherstrip into place
    • Push on the rubber trim on the side of the door
    • Push the power mirror harness into place
    • Carefully push the watershield into place
    • Tighten the sensor with two T25 torx screws
    • Push the speaker wire leads into place
    • Insert the window motor into place
    • Tighten the three T25 screws to the motor
    • Insert the three connectors to the motor
    • Strap in the mirror wiring harness
  6. step : Installing the Door Panel (15:29)
    • Push the orange safety clip forward on the switch panel wiring harness
    • Push the orange safety clip in while reconnecting the wiring harness
    • Click the speaker wire back in
    • Connect the door latch cable
    • Lift the door panel up into place
    • Push the door panel clips in
    • Insert the four screws into the top of the door panel
    • Insert the two screws underneath the door pull
    • Insert the silver trim panel into place
    • Push on the trim button below the door pull

Tools needed for replacement:

    General Tools

  • Flashlight

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver
  • T45 Torx Socket
  • T25 Torx Driver

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Saved me lots of $$$
Part worked Great!, but I would order New Clips that hold the rubber trim. Most of them break when you remove the rubber trim. Plus: Put some liquid wrench on the bottom screw that holds the door panel on!, before you start!
October 10, 2017
Purchased
10 months ago
Great product! Easy to install with their instructions too!
This product is nearly the same as OEM. The spindle containing the twisted metal cable inside of the spindle is held in with a zip tie. DO NOT REMOVE THIS ZIP TIE until the regulator is in place into the window! I made this mistake and was unable to reconfigure the regulator, it took me about an hour to fix my mistake. Great product overall.
September 30, 2017
Purchased
11 months ago
Perfect
Yes. This is the part that replaces a $160 OE part and the quality is perfect. It isn't the quickest, easiest job, but there are no pop rivets to replace with bolts - everything is a torx. Do buy a handful of "clips" for the interior panel as well.
April 2, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002 Audi A4 (From VIN 140001) Front Power Window Regulator without Motor Passenger Side
  • 2003-2008 Audi A4 Wagon Front Power Window Regulator without Motor Passenger Side
  • 2003-2008 Audi A4 Sedan Front Power Window Regulator without Motor Passenger Side
  • 2002 Audi A4 Quattro (From VIN 140001) Front Power Window Regulator without Motor Passenger Side
  • 2003-2008 Audi A4 Quattro Sedan Front Power Window Regulator without Motor Passenger Side
  • 2003-2008 Audi A4 Quattro Wagon Front Power Window Regulator without Motor Passenger Side
  • 2007 Audi RS4 Front Power Window Regulator without Motor Passenger Side
  • 2008 Audi RS4 Sedan Front Power Window Regulator without Motor Passenger Side
  • 2004-2008 Audi S4 Wagon Front Power Window Regulator without Motor Passenger Side
  • 2004-2008 Audi S4 Sedan Front Power Window Regulator without Motor Passenger Side

This part replaces:

  • Hollander 125-58986R
  • OE # 8E0837462C
  • Dorman 749-638
Part #: 1AWRG01349


Order must be placed by 4pm ET

How-to Video:

(19:04 min)