These replacement sway bar links are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 8E0 411 317, 8E0 411 318, 8E0411317, 8E0411318
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These links make great replacements and offer good cost savings over dealer parts.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Remove the center cap with a cap removal tool or pick
    • Loosen the 17mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands evenly on both sides
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:42)
    • Remove the lower 16mm bolt with a ratchet, 16mm socket, and a 13mm wrench
    • Remove the upper 16mm bolt with a ratchet, 16mm socket, and a 13mm wrench
    • If needed, use rust penetrant and locking pliers
    • Remove the sway bar link
  3. step : Installing the Sway Bar Link (3:36)
    • Insert the sway bar link into place
    • Hand tighten the upper bolt without cross threading it
    • Remove the upper 16mm bolt
    • Remove the lower 16mm bolt
    • Torque the bolt to 30 foot-pounds and a 1/4 turn
  4. step : Reattaching the Wheel (4:42)
    • Slide the wheel into place
    • Start the 17mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 90 foot-pounds in a star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 13mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Work great, perfect fit
These sway bar links were a perfect fit and felt like the same quality as the factory pair I removed. The ones I replaced were squeaking badly during tight turns. No more squeak with these
January 3, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2008 Audi A4 Front Sway Bar Link Pair
  • 2009 Audi A4 Convertible Front Sway Bar Link Pair
  • 2002-2008 Audi A4 Quattro Front Sway Bar Link Pair
  • 2009 Audi A4 Quattro Convertible Front Sway Bar Link Pair
  • 2007-2008 Audi RS4 Front Sway Bar Link Pair
  • 2004-2009 Audi S4 Front Sway Bar Link Pair

This part replaces:

  • Moog K80843
  • Moog K80842
  • OE # 8E0411317
  • OE # 8E0411318
Part #: 1ASFK00690

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(06:01 min)