Audi Sway Bar Bushing Rear Pair - 1ASFK00674

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Rear

These replacement sway bar bushings are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links & frame bushings are. Over time the frame bushings can wear resulting in noises such as clunking or banging.


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Mounts to the frame
  • Replaces dealer part numbers: 4B0511327, 4B0 511 327
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the frame bushings. These bushings make great replacements and offer good cost savings over the dealer parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:50)
    • This step is optional to make the repair a bit easier
    • Pry off the center cap with the Audi pick removal tool
    • Loosen the 17mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Bushings (1:40)
    • Remove the two 13mm bolts holding the retainer to the frame
    • Remove the bracket
    • Remove the bushing
    • Repeat the process for the other side
  3. step : Installing the Sway Bar Bushings (3:12)
    • Insert the new bushing into place
    • Insert the bracket into place
    • Tighten the 13mm bolts to the bracket
    • Repeat the process for the other side
  4. step : Reattaching the Wheel (4:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 90 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Specialty Tools

  • Audi Wheel Cap Removal Tool

  • Wrenches - Metric

  • 17mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2008Audi A4 Audi A4 Rear Sway Bar Bushing Pair
2002-2008Audi A4 Quattro Audi A4 Quattro Rear Sway Bar Bushing Pair
2003Audi RS6 Audi RS6 Rear Sway Bar Bushing Pair
2004-2005Audi S4 Audi S4 Rear Sway Bar Bushing Pair
Only 1 left in stock
Part #: 1ASFK00674

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:42 min)