These replacement sway bar bushings are just what you need to bring back the safety and integrity of your vehicle's suspension.

Specifications:

  • Sway Bar Frame Bushings
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 4D0411327J, 4D0 411 327 J
  • Direct replacements
  • Built to strict quality control standards
  • Fits 29mm sway bars
Worn bushings can result in popping or banging noises, and pose a serious safety concern. Replace your old bushings now with these high quality replacements!

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Splash Shield (0:45)
    • Raise and support the vehicle on jack stands
    • Remove the Phillips screws and flat blade fasteners from the splash shield
    • Lower the splash shield
  2. step : Removing the Sway Bar Bushings (1:35)
    • Spray the sway bar's bracket with rust penetrant
    • Remove the 13mm nuts from the sway bar bracket
    • Pull the sway bar down a bit
    • Remove the brackets and bushings
  3. step : Installing the Sway Bar Bushings (2:53)
    • Press the bushing onto the sway bar so that it meets with the frame
    • Tighten the 13mm nuts to the bracket
    • Lower the vehicle to the ground
    • Torque the 13mm nuts to 18 foot-pounds
  4. step : Reinstalling the Splash Shield (4:15)
    • Insert the splash shield into place
    • Tighten the Phillips screws and flat blade fasteners to the splash shield

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2002-2008Audi A4 Audi A4 Front Sway Bar Bushing Pair
2009Audi A4 Audi A4 Convertible Front Sway Bar Bushing Pair
2002-2008Audi A4 Quattro Audi A4 Quattro Front Sway Bar Bushing Pair
2009Audi A4 Quattro Audi A4 Quattro Convertible Front Sway Bar Bushing Pair
2006-2011Audi A6 Audi A6 Front Sway Bar Bushing Pair
2006-2011Audi A6 Quattro Audi A6 Quattro Front Sway Bar Bushing Pair
2008-2013Audi R8 Audi R8 Front Sway Bar Bushing Pair
2007-2008Audi RS4 Audi RS4 Front Sway Bar Bushing Pair
2004-2008Audi S4 Audi S4 Front Sway Bar Bushing Pair
2007-2011Audi S6 Audi S6 Front Sway Bar Bushing Pair

This part replaces:

  • OE # 4D0411327J
Part #: 1ASFK01202

Out of Stock

How-to Video:

(05:14 min)