Replaces

Audi Serpentine Belt Tensioner with Pulley - 1AEBT00058

This replacement serpentine belt tensioner is just what you need to get your vehicle in good working order again! If you are hearing a whirring noise from the front of your engine or if your belt often screeches you may be in need of a new belt tensioner. This part commonly wears out between 60,000 and 70,000 Miles. If it fails suddenly it can leave you stranded.

Specifications:

  • Brand New Serpentine Belt Tensioner
  • Replaces dealer part numbers: 078903133Q, 078 903 133Q
  • Direct replacement
  • Built to strict quality control standards

This tensioner makes a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1994 Audi 100 Serpentine Belt Tensioner with Pulley V6 2.8L (Built After 10/93 Production Date)
  • 1994 Audi 100 Quattro V6 2.8L Serpentine Belt Tensioner with Pulley (Built After 10/93 Production Date)
  • 1994 Audi 90 Serpentine Belt Tensioner with Pulley V6 2.8L (Built After 10/93 Production Date)
  • 1995 Audi 90 Serpentine Belt Tensioner with Pulley V6 2.8L (Built Before 9/94 Production Date)
  • 1994 Audi 90 Quattro Serpentine Belt Tensioner with Pulley V6 2.8L (Built After 10/93 Production Date)
  • 1995 Audi 90 Quattro Serpentine Belt Tensioner with Pulley V6 2.8L (Built Before 9/94 Production Date)
  • 1995 Audi A6 Serpentine Belt Tensioner with Pulley V6 2.8L (Built Before 9/94 Production Date)
  • 1995 Audi A6 Quattro Serpentine Belt Tensioner with Pulley V6 2.8L (Built Before 9/94 Production Date)
  • 1994 Audi Cabriolet Serpentine Belt Tensioner with Pulley V6 2.8L (Built After 11/93 Production Date)
  • 1995 Audi Cabriolet Serpentine Belt Tensioner with Pulley V6 2.8L (Built Before 1/95 Production Date)

This part replaces:

  • OE # 078903133Q
Only 1 left in stock
Part #: 1AEBT00058