• Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) front 
  • Direct replacements
  • Built to strict quality control standards

Fit guaranteed

  • These fog lamps will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
  • If these fog lights should fail to provide satisfactory performance you may exchange them.
  • 1A Auto fog lights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
  • Replacing a discolored, scratched, dull or damaged fog lamp with a fog light from 1A Auto can help increase your resale value.
  • A new driving light can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched driving light.
    • 1A Auto fog lights can help you see farther at night and in poor driving conditions.
    • A set of new fog lights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Grille (0:22)
    • Grab the grille with both hands
    • Pull the grille out
  2. step : Removing the Fog Light (0:40)
    • Remove the two T25 Torx bolt from the fog light
    • Pull the fog light out
    • Press the tabs and disconnect the wiring harness
  3. step : Installing the Fog Light (1:40)
    • Connect the wiring harness
    • Insert the fog light into the bumper
    • Tighten the two T25 Torx bolts to the fog light
  4. step : Installing the Grille (1:58)
    • Press the grille into the bumper

Tools needed for replacement:

    Torx Drivers & Sockets

  • T25 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2008-2012 Audi A4 Sedan Front Bumper Mounted Fog / Driving Light Pair
  • 2008-2012 Audi A4 Quattro Sedan Front Bumper Mounted Fog / Driving Light Pair
  • 2009-2011 Audi A6 Front Bumper Mounted Fog / Driving Light Pair
  • 2009-2011 Audi A6 Quattro Front Bumper Mounted Fog / Driving Light Pair
  • 2013-2016 Audi Allroad Front Bumper Mounted Fog / Driving Light Pair
  • 2009-2016 Audi Q5 Front Bumper Mounted Fog / Driving Light Pair
  • 2010-2012 Audi S4 Front Bumper Mounted Fog / Driving Light Pair
  • 2009-2011 Audi S6 Front Bumper Mounted Fog / Driving Light Pair
  • 2014-2016 Audi SQ5 Front Bumper Mounted Fog / Driving Light Pair

This part replaces:

  • TYC 19-0648-00-1
  • Partslink AU2592115
  • Hollander 116-50474L
  • OE # 8T0941699B
  • TYC 19-0647-00-1
  • Partslink AU2593115
  • Hollander 116-50469R
  • OE # 8T0941700B
Part #: 1ALFP00393

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(02:47 min)