Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   6 Piece Set

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

This Ignition Coil over spark plug (Set of 6) features the following specifications:

  • Comes as a SET of 6
  • Brand New
  • Replaces dealer part numbers: 06B905115L, 06B905115D, 06B905115G, 06B905115H, 06B905115J, 06B905115L
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested

This SET of 6 coils is a coil over plug distributorless application. Sold as a SET of 6, Enough to do (1) 6 Cylinder 2.7L Engine. If you need only one, please see our other listings.

 

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Engine Cover (0:45)
    • Turn the three engine cover clips 90 degrees with a flat blade screwdriver
    • Pull off the engine cover
  2. step : Removing the Ignition Coil (1:12)
    • Disconnect the ignition coil wiring harness
    • Pull out the ignition coil
  3. step : Installing the New Ignition Coil (1:38)
    • Push the new ignition coil into place
    • Connect the ignition coil wiring harness
    • Repeat Steps 2 and 3 for the remaining coils
  4. step : Reinstalling the Engine Cover (1:58)
    • Put the engine cover into place, centering it on the oil filter
    • Push in the three engine cover clips with a flat blade screwdriver
    • Turn the clips 90 degrees to push them in

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2004Audi A6 Audi A6 Ignition Coil 6 Piece Set V6 2.7L Turbo
2003-2004Audi A6 Quattro Audi A6 Quattro Ignition Coil 6 Piece Set V6 2.7L Turbo
2003-2005Audi Allroad Quattro Audi Allroad Quattro Ignition Coil 6 Piece Set V6 2.7L Turbo
Part #: 1AERK00098


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:49 min)