This replacement Tail light is just what you need to get your vehicle in good looking form again!

This tail lamp features the following specifications:

  • LH (Driver Side)
  • Outer (1/4 Panel)
  • Replaces dealer part number: 8E5 945 095 A, 8E5945095A
  • Includes lens & Housing
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement

This tail light makes a great replacement and has good cost savings over a dealer unit.

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Tail Light (0:45)
    • Pry out the insulation trim button near the tail light
    • Remove the bolt from the tail light with a flat blade screwdriver
    • Pull back the red tab to release the fuel door
    • Jimmy the tail light out
    • Disconnect the tail light wiring harness
  2. step : Servicing the Bulbs (1:45)
    • Unlatch the tail light circuit board from the light
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
    • Latch the circuit board into the tail light
  3. step : Installing the New Tail Light (2:22)
    • Reconnect the wiring harness to the tail light
    • Line up the bolt holes on the tail light bracket to the bolt holes on the vehicle
    • Insert the tail light into place
    • Tighten the bolt to the tail light with a flat blade screwdriver
    • Push on the insulation trim button

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005Audi A4 Audi A4 Sedan (From VIN 400001) Outer Tail Light Driver Side
2006-2008Audi A4 Audi A4 Sedan Outer Tail Light Driver Side
2005Audi A4 Quattro Audi A4 Quattro Sedan (From VIN 400001) Outer Tail Light Driver Side
2006-2008Audi A4 Quattro Audi A4 Quattro Sedan Outer Tail Light Driver Side
2005Audi S4 Audi S4 Sedan (From VIN 400001) Outer Tail Light Driver Side
2006-2008Audi S4 Audi S4 Sedan Outer Tail Light Driver Side

This part replaces:

  • Partslink AU2800103
  • Hollander 166-59919L
  • TYC 11-11186-90
  • OE # 8E5 945 095 A
Only 3 left in stock
Part #: 1ALTL01436


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:01 min)