Specifications:

  • Brand New, Not Remanufactured Alternator
  • 136 Amps
  • No core charge
  • Direct replacement
  • Correct electrical connections
  • Built to strict quality control standards
This replacement alternator is just what you need to get your vehicle in good working order again. If your battery is no longer being charged completely, or at all, this alternator may be the solution for you.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Serpentine Belt from the Alternator (0:38)
    • Attach a 15mm socket and ratchet to the serpentine belt tensioner
    • Push the tensioner down to loosen the belt
    • Pull the belt off the alternator pulley
    • Carefully release the tensioner
  2. step : Disconnecting the Battery (1:04)
    • Disconnect the negative battery cable with a 12mm socket and ratchet
  3. step : Removing the Alternator (1:14)
    • Disconnect the alternator wiring harness
    • Remove the alternator lead cap
    • Remove the 13mm nut from the alternator lead
    • Pull the lead off of the alternator
    • Remove the 13mm bolt from the alternator
    • Remove the two 15mm bolts from the alternator
    • Pry the alternator off with a pry bar or a flat blade screwdriver
  4. step : Installing the New Alternator (2:28)
    • Put the new alternator into place
    • Start one 15mm bolt into the alternator by hand
    • Start the second 15mm bolt by hand
    • Insert the 13mm bolt into the alternator
    • Tighten the two 15mm bolts
    • Tighten the 13mm bolt
    • Put the alternator lead into place
    • Tighten the 13mm nut onto the wiring lead
    • Put on the wiring lead cap
  5. step : Reinstalling the Serpentine Belt (3:49)
    • Attach a 15mm socket and ratchet to the serpentine belt tensioner
    • Push the tensioner down to loosen the belt
    • Pull the belt onto the alternator pulley
    • Carefully release the tensioner
    • Connect the alternator wiring harness
  6. step : Reconnecting the Battery (4:02)
    • Reconnect the negative battery cable with a 12mm socket and ratchet

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 15mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Easy instalacion
Due the thornado got may part yesterday I'm happy my son no have any problem to installed so happy thanks
September 7, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2006 Dodge Dakota 136 Amp Alternator V8 4.7L
  • 2004-2006 Dodge Dakota 136 Amp Alternator V6 3.7L
  • 2001-2004 Jeep Grand Cherokee 136 Amp Alternator V8 4.7L
  • 2002-2004 Jeep Liberty 136 Amp Alternator V6 3.7L
  • 2005 Jeep Liberty 136 Amp Alternator ID 56041693 Alternator V6 3.7L
  • 2006 Jeep Liberty 136 Amp Alternator V6 3.7L
  • 2006 Mitsubishi Raider 136 Amp Alternator V6 3.7L
  • 2006 Mitsubishi Raider 136 Amp Alternator V8 4.7L

This part replaces:

  • OE # 56029700AA
  • OE # 56041120AC
  • OE # 56041693AA
  • Hollander 601-00908B
  • Lester 13873
  • TYC 2-13873
Part #: 1AEAL00423

Out of Stock

How-to Video:

(04:32 min)