Specifications

  • BRAND NEW - Not remanufactured
  • 100 Amp Alternator
  • No core charge
  • Replaces dealer part number: 27060-0H100, 270600H100
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with L4 2.4L Engine only

Fit guaranteed

  • This NEW alternator will install just as your original does.
  • Designed to fit your original engine brackets.
  • Your existing wiring harness will attach with no modification.

Quality

    • This Alternator will give you trouble free performance
    • Each unit is individually tested.
      • You'll receive a report with your alternator that shows its performance.
      • Example (pdf)
  • New vs. Remanufactured
    • Nothing is more frustrating than pulling off the side of the road with a failed alternator. That is why we carry only new alternators which are more reliable than remanufactured alternators.
    • Our Alternators are 100% NEW. Castings, pulleys, fans, hardware, internal parts, etc. are all new.
    • No Core Charge; No hassling with an old core
This replacement alternator is just what you need to get your vehicle in good working order again. If your battery is no longer being charged completely, or at all, this alternator may be the solution for you.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Serpentine Belt (0:55)
    • Loosen the 10mm negative battery terminal
    • Familiarize yourself with the route of the serpentine belt
    • Insert a breaker bar and 19mm socket into the tensioner
    • Slowly turn the tensioner clockwise to loosen the belt
    • Pull the belt off the alternator
    • Slowly release the tensioner
  2. step : Removing the Alternator (4:07)
    • Unbolt the positive cable bolt from the alternator with a 10mm socket and ratchet
    • Remove the 10mm bolt from the alternator bracket
    • Unclip the bracket with a flat blade screwdriver
    • Disconnect the alternator connector
    • Pop the harness mounts out of the brackets
    • Remove the 14mm bolt from the alternator
    • Remove the 12mm bolt from the alternator
    • Maneuver the alternator from the bracket with a pry bar
  3. step : Installing the Alternator (10:38)
    • Insert the alternator into place
    • Tighten the 12mm bolt to the alternator
    • Tighten the 14mm bolt to the alternator
    • Torque the 14mm bolt to 38 foot-pounds
    • Pop the harness mounts into the brackets
    • Connect the alternator connector
    • Insert the positive cable into place
    • Tighten the 10mm bolt to the positive cable
    • Place the boot on the positive cable
    • Insert the bracket into place
    • Tighten the 10mm bolt to the bracket
    • Clip the bracket on
  4. step : Reinstalling the Serpentine Belt (14:16)
    • Loop the belt around the crank pulley
    • Bring it around the power steering pulley
    • Bring it around the water pump
    • Bring it around the A/C Pulley
    • Bring it around the crank shaft pulley
    • Bring it around the belt tensioner
    • Slowly pull the tensioner clockwise with a 19mm socket and breaker bar
    • Pull the belt over the alternator
    • Release the tensioner

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 19mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Scion tC 100 Amp Alternator
  • 2004-2006 Toyota Camry 100 Amp Alternator L4 2.4L
  • 2004-2007 Toyota Highlander 100 Amp Alternator L4 2.4L
  • 2004-2006 Toyota Solara 100 Amp Alternator L4 2.4L

This part replaces:

  • OE # 270600H100
  • Hollander 601-60905A
  • Lester 11034
  • TYC 2-11034
Only 1 left in stock
Part #: 1AEAL00416

How-to Video:

(15:31 min)