Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   3 Piece Set
  • Kit Includes:
      (1) Air Suspension Compressor
      (2) Rear Electronic Conversion Air Shocks

Specifications:

  • Compressor features:
    • Brand new
    • Includes compressor and dryer
    • Complete assembly
  • Spring assembly features:
    • Integrated Dampening Control Sensors
    • Complete assemblies
    • Direct replacements for factory electronic shocks
    • No modifications necessary

This item is a passive conversion for models that originally came equipped with an automatic dampening (electronic) suspension.  It will fit just like the original did, bypass the factory sensors, and allow a more consistent ride thanks to a revised gas shock design.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Air Suspension Pump (0:20)
    • Raise the vehicle with a jack
    • Secure the vehicle on jack stands
    • Remove the 13mm bolt from the frame
    • Pry the pick-up filter from the wire clip
    • Maneuver the pick-up filter free
    • Remove the 13mm bolt in the frame
    • Loosen the 13mm bolt from the compressor bracket
    • Lower the compressor off
    • Disconnect the connectors from the pump
  2. step : Preparing the New Pump (4:33)
    • Pry the clips out from the cover
    • Remove the cover from the bracket and old compressor
    • Remove the T25 Torx bolts from the bracket
    • Pry the old airlines out of the clips on the bracket
    • Remove the pump from the bracket
    • Remove the old air connector hose
    • Slide the connector hose onto the new compressor
    • Remove the plastic band from the new connector
    • Place the pump into the bracket
    • Tighten the T25 Torx bolts to the bracket
    • Press the cover onto the bracket
    • Place on the new pressure sensor and locking washer with a 24mm wrench
    • Connect the electrical connector to the pressure sensor
  3. step : Installing the Air Suspension Pump (12:35)
    • Slide the two studs into the holes in the frame
    • Tighten the 13mm bolt into the frame
    • Insert the pick-up filter into place and clip it in
    • Connect the connectors to the pump

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 13mm Socket

  • Specialty Tools

  • Trim Tool Set

  • Torx Drivers & Sockets

  • T25 Torx Driver

  • Wrenches - Metric

  • 24mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2014Cadillac Escalade Cadillac Escalade 3 Piece Set Air Suspension Kit
2007-2014Cadillac Escalade ESV Cadillac Escalade ESV 3 Piece Set Air Suspension Kit
2007-2013Cadillac Escalade EXT Cadillac Escalade EXT 3 Piece Set Air Suspension Kit
2007-2013Chevy Avalanche Chevy Avalanche 3 Piece Set Air Suspension Kit
2007-2014Chevy Suburban 1500 Chevy Suburban 1500 3 Piece Set Air Suspension Kit
2007-2013Chevy Suburban 2500 Chevy Suburban 2500 3 Piece Set Air Suspension Kit
2007-2014Chevy Tahoe Chevy Tahoe 3 Piece Set Air Suspension Kit
2007-2014GMC Yukon GMC Yukon 3 Piece Set Air Suspension Kit
Part #: 1ASFK04682

Out of Stock

How-to Video:

(13:55 min)