Replaces

Air Ride Suspension Compressor with Dryer Arnott A-2610, P-2857 - ARSFK00020

Specifications:

  • Brand New Arnott Air Suspension Compressor & Spring Kit
  • Includes:
    • Brand Remanufactured Air Suspension Compressor with Dryer
    • LH (Driver Side) & RH (Passenger Side) Rear air springs
  • Compressor features:
    • No core charge
    • Complete assembly
  • Air Spring features:
    • Gen - II* Upgraded design
    • Heavy duty air spring bladders
    • Direct replacements
    • Built to strict quality control standards
  • Correct for 5 passenger (113" wheel base) models only
  • Does not include lines & fittings
*Arnott has just completed the development of the second generation rear air springs for the Chevrolet Trailblazer. Arnott has specially designed them to eliminate many of the common problems associated with the older OE bellow design. These air springs feature a state-of-the-art tapered bladder that provides an unparalleled ride quality. An upgrade from the original, this new air spring's design features CNC-machined crimp rings, which are used to hold together the heavy duty air springs' assembly. The crimp ring assures durability, as opposed to the loose-fitting snap together original design, making the second generation air spring more dependable. In the spirit of evolution, experience for yourself Arnott's stronger, more dependable air spring, the next generation of suspension technology.

ARNOTT is your source for air shocks and air suspension components for Lincoln, Ford, Cadillac, Lexus and Range Rover. Since 1989, Arnott has been designing and manufacturing quality air struts, compressors (pumps) and air bags (springs). Arnott continues to lead in research and development of new products while maintaining affordable prices.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Accessing the Compressor (0:43)
    • Open the fuse box
    • Disconnect the ECAS with a pair of pliers
    • Jack up the vehicle underneath the axle
    • Place jack stands underneath the rear frame rails
    • Take four sections of the jack pipe
    • Insert it into the rear hole, connect a tire iron, and turn it counterclockwise to lower the spare tire
  2. step : Disconnecting the Compressor (1:47)
    • Disconnect the wiring harnesses
    • Remove the harness clip from the frame
    • Push the hose in, push down on the connector, and pull the hose free
    • Remove the two 13mm bolts from the compressor
    • Pull the compressor down
    • Loosen the two hoses with a 10mm wrench
    • Release the air from the springs
    • Push the hoses in and tighten the fittings to 1 or 2 ft/lbs
    • Replace the two 13mm bolts and tighten them to the frame
  3. step : Removing the Air Springs (4:23)
    • Pull the bottom of the spring out
    • Push down and unlock the tab on the back of the spring and twist
    • Push the driver's side spring with a screwdriver and drive it with a hammer to release it
    • Pull the spring down
    • Disconnect the hose by pushing down on the fitting on the hose with pliers
  4. step : Installing the Air Springs (5:24)
    • Remove the plastic shipping piece on the tip
    • Open the top of the air spring using a 10mm wrench
    • Push the hose down into place
    • Tighten the 10mm nut
    • Twist the air spring into place
  5. step : Installing the Air Compressor (7:02)
    • Reconnect the two hoses and wiring harness
    • Clip the harness to the frame
    • Make sure both springs seat correctly to the axle as you lower the vehicle
    • Reinstall the ECAS control
    • Close the fuse box
    • Start up the vehicle to inflate the bags
    • Raise up the spare tire

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Hello I was wondering if the air suspension compressor with air dryer kit will fit my 2007 Chevy Trailblazer SS?
Reggie on Dec 30, 2017
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle as long as it is the standard, 5 psgr size. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.

Vehicle Fit

  • 2004-2007 Buick Rainier Air Ride Suspension Compressor with Dryer Remanufactured Arnott A-2610, P-2857
  • 2002-2009 Chevy Trailblazer Air Ride Suspension Compressor with Dryer Remanufactured Arnott A-2610, P-2857
  • 2002-2009 GMC Envoy Air Ride Suspension Compressor with Dryer Remanufactured Arnott A-2610, P-2857
  • 2002-2004 Olds Bravada Air Ride Suspension Compressor with Dryer Remanufactured Arnott A-2610, P-2857
  • 2007-2009 Saab 9-7X Air Ride Suspension Compressor with Dryer Remanufactured Arnott A-2610, P-2857

This part replaces:

  • Arnott Industries A-2610
  • Arnott Industries P-2857
  • Hollander 517-00912
  • OE # 25815604, 15125532, 15276029
  • OE # 25978169, 19177907
  • Hollander 517-00164
  • Arnott A-2610, P-2857
Only 2 left in stock
Part #: ARSFK00020

Arnott
Brand #: A-2610, P-2857

How-to Video:

(08:17 min)