Replaces

Acura MDX Honda Pilot Sway Bar Link Pair - 1ASFK01694

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

These replacement sway bar links are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 52320-S3V-003, 52320-S3V-023, 52325-S3V-003, 52325-S3V-023, 52320S3V003, 52320S3V023, 52325S3V003, 52325S3V023
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These links make great replacements and offer good cost savings over the dealer parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:17)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:28)
    • Turn the wheel by hand
    • Hold the lower stabilizer link stud with a 14mm wrench
    • Remove the lower nut from the stabilizer link with a 5mm Allen wrench
    • Hold the upper stabilizer link stud with a 14mm wrench
    • Remove the upper nut from the stabilizer link with a 5mm Allen wrench
    • Pull off the stabilizer link
  3. step : Installing the Sway Bar Link (6:17)
    • Push the stabilizer link into place
    • Start the 14mm nuts by hand
    • Hold the upper stabilizer link stud with a 14mm wrench
    • Fasten the upper nut onto the stabilizer link with a 5mm Allen wrench
    • Hold the lower stabilizer link stud with a 14mm wrench
    • Fasten the lower nut onto the stabilizer link with a 5mm Allen wrench
  4. step : Reattaching the Wheel (7:27)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Good value
I made several purchases through this site and they have delivered as promised. Package is well prepped. Only issue is their phone wait is longer than the five minute pre-recorded message. But I will use this site again, good value.
November 3, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2010Acura MDX Acura MDX Rear Sway Bar Link Pair
2003-2008Honda Pilot Honda Pilot Rear Sway Bar Link Pair
Part #: 1ASFK01694


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:05 min)