Specifications:

  • Brand New Suspension Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 4 Piece Set
  • Kit Includes: (2) Front Strut & Spring Assemblies

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:58)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:52)
    • Hold the upper stabilizer link stud with a 19mm wrench
    • Remove the upper nut from the stabilizer link with a 17mm socket and ratchet
    • Hold the lower stabilizer link stud with a 19mm wrench
    • Remove the lower nut from the stabilizer link with a 17mm socket and ratchet
    • Pull off the stabilizer link
  3. step : Reinstalling the Stabilizer Link (3:30)
    • Push the stabilizer link into place
    • Start the 17mm nuts by hand
    • Hold the upper stabilizer link stud with a 19mm wrench
    • Fasten the upper nut onto the stabilizer link with a 17mm wrench
    • Hold the lower stabilizer link stud with a 19mm wrench
    • Fasten the lower nut onto the stabilizer link with a 17mm wrench
  4. step : Reattaching the Wheel (3:51)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 17mm Wrench
  • 19mm Wrench

3.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
1
0
Has leaked over 50% within 4 months of use
Product came clean, easy to install, fit just like oem. Bad side is that over 50% of the oil from both struts has leaked and is visible all over the axle and wheel well. The ride is not as stiff as it used to be and it is time to replace. You should go with oem instead for twice the price but 10x the longevity.
November 15, 2017
Purchased
1 year ago
Great Ride!
These went on easier then I was expecting and the ride is quiet and like new. Glad I bought the kit with the sway bar links as both of the originals were bad.
September 1, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2002 Acura MDX 4 Piece Set Suspension Kit
  • 2003-2005 Honda Pilot 4 Piece Set Suspension Kit

This part replaces:

  • OE # 06513S0XA00
  • Moog K90349
  • Monroe 171452
  • Monroe 171451
  • Monroe 181452
  • Monroe 181451
  • KYB SR4169
  • KYB SR4168
  • Hollander 527-60049L
  • Hollander 527-60048R
  • OE # 06513-S0X-A00, 51320S0XA02
Part #: 1ASFK04939

How-to Video:

(04:40 min)